Premium Information is available for this item - Upgrade for $1 a day
5310-01-597-3304
Flat Washer
5310015973304 015973304 3000064-34 3000064
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
3
Marketplace 5310-01-597-3304
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-597-3304 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5310-01-597-3304 RQST NE Updated Every Day 5310-01-597-3304 RQST
) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-597-3304 Flat Washer 5310015973304015973304 3000064
A washer having a centrally located hole with a solid or laminated cross-section and two -38 3000064
A washer having a centrally located hole with a solid or laminated cross-section and two -38 3000064
A washer having a centrally located hole with a solid or laminated cross-section and two -38 3000064
Flat Washer 5310015973304 015973304 -34 3000064 A washer having a centrally located hole with a
Flat Washer 5310015973304 015973304 -34 3000064 A washer having a centrally located hole with a
-7 3000064 A washer having a centrally located hole with a solid or laminated cross-section and two
Flat Washer 5310015973304 015973304 -34 3000064 A washer having a centrally located hole with a
-7 3000064 A washer having a centrally located hole with a solid or laminated cross-section and two
Restrictions 5310-01-597-3304
5310-01-597-3304 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-597-3304
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-597-3304
- US Army (A919)
- Effective Date:
- 1 Jun 2011
- Supplementary Receivers:
- AZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Jun 2011
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2012
- Supplementary Collaborators:
- HD
Approved Sources 5310-01-597-3304
- Part Number
- Manufacturer
- Status
- 3000064-34
- Manufacturer
- 80212 - Bae Systems Land & Armaments L.P. (Active)
- Primary Buy
- Primary Buy
- 3000064-34
- 076M6 - Bae Systems Land & Armaments L.P. (Active)
- Secondary Buy
- Secondary Buy
- 3000064
- 80212 - Bae Systems Land & Armaments L.P. (Active)
- Informational Drawing
- Informational Drawing
Weapon Systems (WSDC) 5310-01-597-3304
DLA Procurement Analysis 5310-01-597-3304
- Last Stock Position:
- 3788 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-597-3304
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5310-01-597-3304
Freight Information 5310-01-597-3304
5310-01-597-3304 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-597-3304 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-597-3304 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-597-3304 is not classified as a special type of cargo when transported by water. 5310-01-597-3304 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-597-3304
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5310-01-597-3304 6 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE7L016V4104
- 31 Mar 2016
- Subscribe
- 1624
- Subscribe
- Subscribe
- Subscribe
- SPE7L016V3011
- 18 Feb 2016
- Subscribe
- 1440
- Subscribe
- Subscribe
- Subscribe
- SPE7L016V1521
- 18 Dec 2015
- Subscribe
- 754
- Subscribe
- Subscribe
- Subscribe
- SPE7L016V0320
- 19 Oct 2015
- Subscribe
- 40
- Subscribe
- Subscribe
- Subscribe
- SPE7L015V7319
- 02 Sep 2015
- Subscribe
- 80
- Subscribe
- Subscribe
- Subscribe
- SPE7L015M0697
- 13 Nov 2014
- Subscribe
- 22
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5310-01-597-3304 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: