Premium Information is available for this item - Upgrade for $1 a day

5310-01-597-1596

Flat Washer

5310015971596 015971596 0903232024 27KP918 3831395

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer

5310-01-597-1596 WASHER,FLAT 5310015971596 015971596

Managed by United States
NSN Created on 31 May 2011
Data Last Changed
August 2023
NATO Update Count
2
NATO Data Quality
5310-01-597-1596 WASHER,FLAT 5310015971596 015971596 1/1
NSN 5310-01-597-1596 (Generic Image) 1/1

5310-01-597-1596 Stock and Availability Marketplace 5310-01-597-1596

Need Help?
Request a Quotation from participating marketplace vendors
FedMallFedMall.mil Updated Every 15 Minutes
5310-01-597-1596 BUY NE FedMallFedMall.mil
eBay Updated Every Day
5310-01-597-1596 RQST NE eBay
eBay Updated Every Day
5310-01-597-1596 RQST eBay
Amazon Updated Every Day
5310-01-597-1596 RQST NE Amazon

5310-01-597-1596 Related Documents Related Documents 5310-01-597-1596 5+ Documents (More...)

0903232024 27KP918 3831395 A washer having a centrally located hole with a solid or laminated cross-section
BUY NE FedMall Updated Every Day 5310-01-597-1596 RQST NE Updated Every Day 5310-01-597-1596 RQST
Updated Every Day 5310-01-597-1596 RQST NE Related Documents 5310-01-597-1596 5+ Documents ( More...
Account Upgrade 2541-01-586-0814Projectile Defense Netting Section2541015860814 015860814 0903235008 3831395
Flat Washer 5310015971596 015971596 Upgrade your Account Upgrade 5310-01-597-1596Flat Washer5310015971596
015971596 0903232024 27KP918 3831395 Account Upgrade 2541-01-582-7394Projectile Defense Netting Kit2541015827394
Flat Washer 5310015971596 015971596 Upgrade your Account Upgrade 5310-01-597-1596Flat Washer5310015971596
015971596 0903232024 27KP918 3831395 Account Upgrade 2541-01-582-7394Projectile Defense Netting Kit2541015827394
0903232022-1 27KP914 3831395 https//www.nsnlookup.com /fsg-25/fsc-2541/us 2541-01-586-0815 Projectile
Upgrade 2541-01-586-0817Projectile Defense Netting Section2541015860817 015860817 0903235011 24KP466 3831395
Account Upgrade 2541-01-582-7394Projectile Defense Netting Kit2541015827394 015827394 0903231000 3831395
Upgrade 4010-01-597-1581Single Leg Wire Rope Assembly4010015971581 015971581 0903232022-1 27KP914 3831395
Upgrade 2590-01-586-0952Projectile Defense Netting Frame Assembly2590015860952 015860952 0903231054 3831395
Account Upgrade 2541-01-582-7394Projectile Defense Netting Kit2541015827394 015827394 0903231000 3831395
Upgrade 4010-01-597-1581Single Leg Wire Rope Assembly4010015971581 015971581 0903232022-1 27KP914 3831395

5310-01-597-1596 Demil Restrictions 5310-01-597-1596

DEMIL: A | DEMILI: 1 | CRITICALITY: X | HMIC: N | PMIC: A | EDC: A | ADPEC: 0

5310-01-597-1596 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.

5310-01-597-1596 End Users End Users 5310-01-597-1596

US Army (A919)
Effective Date:
1 May 2011
Supplementary Receivers:
AZ
US Air Force (FGGI)
Effective Date:
1 May 2011
US Marine Corps (MC47)
Effective Date:
1 May 2011
US Navy (N9BZ)
Effective Date:
1 May 2011
Supplementary Collaborators:
HD

5310-01-597-1596 Stock, Inventory and Procurement DLA Procurement Analysis 5310-01-597-1596

Last Stock Position:
95 In Stock
DLA Administrative Lead Time:
Subscribe
DLA Production Lead Time:
Subscribe
Subscribe to View DLA Inventory and Forecast...

5310-01-597-1596 Management Data Management Data 5310-01-597-1596

Effective Date
Organization
Unit of Issue
Unit Price
Qty Unit Pack
Oct 2022
Department of the Air Force (DF)
EA
Subscribe
1
Oct 2021
Defense Logistics Agency (DS)
EA
Subscribe
1
Oct 2020
Defense Logistics Agency (DS)
EA
Subscribe
1
Oct 2019
Department of the Air Force (DF)
EA
Subscribe
1

Army Army

Materiel Category and Inventory Manager:
T
Industrial Supplies (DLA/GSA Items)
Appropriation and Budget Activity:
2
Stock Fund Secondary Items
Management Inventory Segment:
2
Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
Weapons System / End Item / Homogeneous Group:
00
DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements:
X
Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.

Air Force Air Force

Fund:
SF
Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
Budget:
9
57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
Price Validation Code:
N
The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ā€œLā€ or ā€œFā€, then it must be evaluated locally where purchased or fabricated.
Expendability
Recoverability
Repairability:
N
Expendable. Condemn at User. Stock Fund (except Munitions).

Navy Navy

Cognizance:
9B
Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg

Marine Corps Marine Corps

Stores Account:
1
Stock Fund Account Item
Combat Essentiality:
5
Critical Repair Part to a Combat Essential End Item
Echelon Management:
B2
Operational Test:
No Special Procedures

5310-01-597-1596 Similar Items Similar Supply Items to 5310-01-597-1596

5310-01-597-1596 Freight Data Freight Information 5310-01-597-1596

5310-01-597-1596 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-597-1596 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-597-1596 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-597-1596 is not classified as a special type of cargo when transported by water. 5310-01-597-1596 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.

5310-01-597-1596 Packaging Data Packaging Data 5310-01-597-1596

Responsible Activity
Packaging Data Source
Primary Inventory Control Activity (PICA)
--

Item Pack Level (Unpackaged)

Item Size
Item Weight
Characteristics
Weight/Dimensions Category
Fragility
Item Preservation
--
--
--
--
--

Unit Pack Level (Packaged)

Quantity per Pack
Unit Size
Unit Weight
Unit Cube
Preservation Method
Cleaning/Drying
1
--
--
--
--
Any Suitable Process
Preservation Material
Wrapping Material
Cushioning/Dunnage
Cushioning Thickness
Container
Special Marking
No Requirement
No Requirement
No Requirement
Not Applicable
MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
No special marking

Intermediate Pack Level

Quantity of Unit Packs
Container
PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box

5310-01-597-1596 Procurement History Procurement History 5310-01-597-1596 1 Records

Contract
Date
CAGE
Quantity
Net Price
Std Price
SPM7L413V2045
22 Jan 2013
Subscribe
143
Subscribe
Subscribe

5310-01-597-1596 Contracting Technical Data File (CTDF) Contracting Technical Data File (CTDF) 5310-01-597-1596 February 2021

Criticality and Quality

Critical Item Code:
Flight Safety:
Life Support:
Certified Samples:
Serialization:
First Article Test (FAT):
Certificate of Quality Compliance:
Production Lot Testing:
Special Testing:
Qualified Products List (QPL):

Commercial Properties

Government Furnished Material:
Government Furnished Tooling:
Government Furnished Property:
Price Evaluation Code:
Diminshing Manufacturing Sources:
Warranty:
Commerical Off The Shelf (COTS):
End Item Application:
Auctioning Candidate:
Source of Procurement:
Contract Option:

Restrictions

Boeing Rights Guard:
Export Controlled:
Controlled Technical Data Package (TDP):
Restricted Technical Data Package (TDP):
Contains Classified Material
Weapons System Indicator Code (WSIC):
J

Packaging Requirements

Packaging Determination Table:
Packaging Review Code:
N
Special Packaging Instruction Number (SPIN):
Special Packaging Instruction Number Revision:
Special Packaging Instruction Number Date:
Pallet Reference Number Required: