Premium Information is available for this item - Upgrade for $1 a day
5310-01-595-4827
Flat Washer
5310015954827 015954827 88-20033-40A 88-20033
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
2
Marketplace 5310-01-595-4827
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-595-4827 5+ Documents (More...)
(Identification) 1/3 NSN 5310-01-595-4827 (Identification) 2/3 NSN 5310-01-595-4827 (Identification
BUY NE FedMall Updated Every Day 5310-01-595-4827 RQST NE Updated Every Day 5310-01-595-4827 RQST
/www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-533-2936 Flat Washer 5310015332936 015332936 -10B 88-20033
/www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-571-9838 Flat Washer 5310015719838 015719838 -34A 88-20033
A washer having a centrally located hole https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-595-4827
Flat Washer 5310015954827 015954827 -40A 88-20033 A washer having a centrally located hole with a solid
-33C 88-20033 A washer having a centrally located hole with a solid or laminated cross-section and two
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-595-4827 Flat Washer 5310015954827 015954827 -40A
Flat Washer 5310015954827 015954827 -40A 88-20033 A washer having a centrally located hole with
a solid or laminated cross-section and two -33C 88-20033 -33C 88-20033 A washer having a centrally located
Restrictions 5310-01-595-4827
5310-01-595-4827 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-595-4827
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-595-4827
- US Army (A919)
- Effective Date:
- 1 Apr 2011
- Supplementary Receivers:
- CL
Approved Sources 5310-01-595-4827
- Part Number
- Manufacturer
- Status
- 88-20033-40A
- Manufacturer
- 30554 - Department Of Defense Project (Active)
- Primary Buy
- Primary Buy
- 88-20033
- 30554 - Department Of Defense Project (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5310-01-595-4827
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.495 Inches Minimum And 0.515 Inches Maximum
- End Item Identification [AGAV]
- 6115-01-562-4616 Generator Set, Diesel Engine
- Material [MATT]
- Steel Overall
- Part Name Assigned By Controlling Agency [CXCY]
- Washer, Flat
- Material Document And Classification [MDCL]
- Astm A108 Assn Std Single Material Response Or Astm A109 Assn Std Single Material Response Overall
- Overall Diameter [ADAV]
- 1.243 Inches Minimum And 1.280 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Surface Treatment Document And Classification [STDC]
- Astm B633, Sc 3, Type Ii Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Zinc Overall
- Thickness [ABNM]
- 0.064 Inches Minimum And 0.104 Inches Maximum
Weapon Systems (WSDC) 5310-01-595-4827
DLA Procurement Analysis 5310-01-595-4827
- Last Stock Position:
- 1528 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-595-4827
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5310-01-595-4827
Freight Information 5310-01-595-4827
5310-01-595-4827 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-595-4827 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-595-4827 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-595-4827 is not classified as a special type of cargo when transported by water. 5310-01-595-4827 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-595-4827 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- R
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: