Premium Information is available for this item - Upgrade for $1 a day
5310-01-591-6564
Flat Washer
5310015916564 015916564 29826 L149021-14 L149021
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
2
Marketplace 5310-01-591-6564
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-591-6564 5+ Documents (More...)
RQST NE Updated Every Day 5310-01-591-6564 RQST Updated Every Day 5310-01-591-6564 RQST NE Related Documents
5310-01-591-6564 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-591-6564
(ZC) 29826 enable JavaScript https//www.nsnlookup.com /fsg-10/fsc-1010/au 1010-66-086-4864 Depression
Arm 1010660864864 660864864 A2/29826 Users 5995-99-203-7191 Canada (ZC) Approved Sources 5995-99-203
1010-66-086-4864 Depression Arm 1010660864864 660864864 Display Indicator 6625013152887 996507-1351-29826
day Upgrade your Account Upgrade 4320-01-160-1706Centrifugal Pump Impeller4320011601706 011601706 29826
-001 An indicator 013152887996507-1 351-29826 www.nsnlookup.com /fsg-66/fsc-6625/us 6625-01-315-2887
1010-66-086-4864 Depression Arm 1010660864864 660864864 -203-7191 Part NumberManufacturerStatusA2/29826
-06 91100A150 L149021 A washer having a centrally located hole with a solid or laminated cross-section
Flat Washer 5310015916564 015916564,29826 for $1 a day Upgrade your Account Upgrade 5310-01-591
Restrictions 5310-01-591-6564
5310-01-591-6564 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-591-6564
- US Army (A919)
- Effective Date:
- 1 Feb 2011
- Supplementary Receivers:
- AZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Feb 2011
Approved Sources 5310-01-591-6564
- Part Number
- Manufacturer
- Status
- 29826
- Manufacturer
- 06VU4 - Eagle Components, Inc (Active)
- Primary Buy
- Primary Buy
- L149021-14
- 0EER9 - Anixter Inc. (Active)
- Secondary Buy
- Secondary Buy
- L149021-14
- 19397 - Bae Systems Information & Electronic (Active)
- Secondary Buy
- Secondary Buy
- L149021
- 0ADD7 - Bae Systems Advanced Technologies (Obsolete)
- Informational Drawing
- Informational Drawing
Weapon Systems (WSDC) 5310-01-591-6564
DLA Procurement Analysis 5310-01-591-6564
- Last Stock Position:
- 32 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-591-6564
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5310-01-591-6564
Freight Information 5310-01-591-6564
5310-01-591-6564 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-591-6564 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-591-6564 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-591-6564 is not classified as a special type of cargo when transported by water. 5310-01-591-6564 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-591-6564
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5310-01-591-6564 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: