Premium Information is available for this item - Upgrade for $1 a day
5310-01-570-7560
Flat Washer
5310015707560 015707560 6437550-07M1 6437550
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
5
Marketplace 5310-01-570-7560
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-570-7560 5+ Documents (More...)
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-570-7560 Flat Washer 5310015707560 015707560 Upgrade
for $1 a day Upgrade your Account Upgrade 5310-01-570-7560Flat Washer5310015707560 015707560 6437550
Flat Washer 5310015707560 015707560 Upgrade for $1 a day Upgrade your Account Upgrade 5310-01-570
-7560Flat Washer5310015707560 015707560 6437550 -07M1 6437550 A washer having a centrally located hole
Jan 2009 5310-01-570-5955 Hexagon Plain Nut 6430310-04M1RNCC: 3 | RNVC: 2 | DAC: 5 7 Jan 2009 5310-01-570-7560
Flat Washer 6437550-07M1RNCC: 3 | RNVC: 2 | DAC: 5 13 Jan 2009 5310-01-570-6340 Hexagon Plain Nut
-06M1 6437550 A washer having a centrally located hole with a solid or laminated cross-section and two
(Active) Primary Buy RNCC 3 RNVC 2 DAC 5 6437550-06M1 6W728 - Bae Systems Survivability Systems (Active
Restrictions 5310-01-570-7560
5310-01-570-7560 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-570-7560
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-570-7560
- US Army (A919)
- Effective Date:
- 1 Jan 2009
- Supplementary Receivers:
- AZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Jan 2009
Approved Sources 5310-01-570-7560
- Part Number
- Manufacturer
- Status
- 6437550-07M1
- Manufacturer
- 6TD24 - O'gara-Hess & Eisenhardt Armoring (Active)
- Primary Buy
- Primary Buy
- 6437550-07M1
- 6W728 - Bae Systems Survivability Systems (Active)
- Original Design
- Original Design
- 6437550-07M1
- 076M6 - Bae Systems Land & Armaments L.P. (Active)
- Secondary Buy
- Secondary Buy
- 6437550-07M1
- 54786 - Bae Systems Land & Armaments L.P. (Active)
- Advisory Reference
- Advisory Reference
- 6437550
- 6W728 - Bae Systems Survivability Systems (Active)
- Informational Drawing
- Informational Drawing
Weapon Systems (WSDC) 5310-01-570-7560
DLA Procurement Analysis 5310-01-570-7560
- Last Stock Position:
- 173 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-570-7560
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5310-01-570-7560
Freight Information 5310-01-570-7560
5310-01-570-7560 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-570-7560 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-570-7560 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-570-7560 is not classified as a special type of cargo when transported by water. 5310-01-570-7560 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-570-7560
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5310-01-570-7560 August 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Y
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: