Premium Information is available for this item - Upgrade for $1 a day
5310-01-562-0269
Flat Washer
5310015620269 015620269 L149021-08 31386 91100A160 9-00004503 L149021 2202-900-006469
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
10
Marketplace 5310-01-562-0269
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-562-0269 5+ Documents (More...)
Updated Every Day 5310-01-562-0269 RQST NE Updated Every Day 5310-01-562-0269 RQST Updated Every Day
/fsg-53/fsc-5310/us 5310-01-562-0269 Flat Washer 5310015620269015620269 L149021-083138691100A1609-00004503L1490212202
91100A160 9-00004503 L149021 2202-900-006469 A washer having a centrally located hole with https//www.nsnlookup.com
/fsg-53/fsc-5310/us 5310-01-562-0269 Flat Washer 5310015620269 015620269 Upgrade for $1 a day Upgrade
Flat Washer 5310015620269 015620269 5310-01-562-0269Flat Washer5310015620269 015620269 L149021-
08 31386 91100A160 9-00004503 L149021 2202-900-006469 Upgrade 5310-01-563-6262Flat Washer5310015636262
6434Flat Washer5310015636434 015636434 12759-01145 MW6420000YZ0000 2202-9-00001984 9-00001984 2202-900-006469
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-562-0269 Flat Washer 5310015620269 015620269
Upgrade for $1 a day Upgrade your Account Upgrade 5310-01-553-7188Flat Washer5310015537188 015537188 L149021
-08 31386 91100A160 9-00004503 L149021 2202-900-006469 A washer having a centrally located hole with
Restrictions 5310-01-562-0269
5310-01-562-0269 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-562-0269
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-562-0269
- US Army (A919)
- Effective Date:
- 1 Mar 2008
- Supplementary Receivers:
- AZ
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2009
- US Marine Corps (MC47)
- Effective Date:
- 1 Jul 2010
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2012
- Supplementary Collaborators:
- HD
- Canada (ZC01)
- Effective Date:
- 1 Jul 2009
Approved Sources 5310-01-562-0269
- Part Number
- Manufacturer
- Status
- L149021-08
- Manufacturer
- 19397 - Bae Systems Information & Electronic (Active)
- Primary Buy
- Primary Buy
- 31386
- 06VU4 - Eagle Components, Inc (Active)
- Secondary Buy
- Secondary Buy
- 91100A160
- 39428 - Mcmaster-Carr Supply Co (Active)
- Secondary Buy
- Secondary Buy
- L149021-08
- 0EER9 - Anixter Inc. (Active)
- Secondary Buy
- Secondary Buy
- 9-00004503
- 1SC69 - Xper, Inc. (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- L149021
- 0ADD7 - Bae Systems Advanced Technologies (Obsolete)
- Informational Drawing
- Informational Drawing
- 2202-900-006469
- 1SC69 - Xper, Inc. (Obsolete)
- Informational Drawing
- Informational Drawing
Weapon Systems (WSDC) 5310-01-562-0269
DLA Procurement Analysis 5310-01-562-0269
- Last Stock Position:
- 5500 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-562-0269
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Defense Logistics Agency (DS)
- HD
- Subscribe
- 1
- HD
- Oct 2021
- Defense Logistics Agency (DS)
- HD
- Subscribe
- 1
- HD
- Jun 2021
- Defense Logistics Agency (DS)
- HD
- Subscribe
- 1
- HD
- Oct 2020
- US Marine Corps (DM)
- HD
- Subscribe
- 1
- HD
- Oct 2019
- Department of the Army (DA)
- HD
- Subscribe
- 1
- HD
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
Similar Supply Items to 5310-01-562-0269
Freight Information 5310-01-562-0269
5310-01-562-0269 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-562-0269 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-562-0269 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-562-0269 is not classified as a special type of cargo when transported by water. 5310-01-562-0269 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-562-0269
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5310-01-562-0269 6 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A623V466Y
- 16 Aug 2023
- Subscribe
- 16
- Subscribe
- Subscribe
- Subscribe
- SPE5E821V1804
- 03 Mar 2021
- Subscribe
- 71
- Subscribe
- Subscribe
- Subscribe
- SPE5E818V3351
- 06 Feb 2018
- Subscribe
- 44
- Subscribe
- Subscribe
- Subscribe
- SPE5E018V0712
- 17 Nov 2017
- Subscribe
- 12
- Subscribe
- Subscribe
- Subscribe
- SPE5E815V7089
- 31 Jul 2015
- Subscribe
- 56
- Subscribe
- Subscribe
- Subscribe
- SPM5E813M4383
- 27 Mar 2013
- Subscribe
- 42
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5310-01-562-0269 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: