Premium Information is available for this item - Upgrade for $1 a day
5310-01-553-0810
Flat Washer
5310015530810 015530810 3001311
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
2
Marketplace 5310-01-553-0810
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-553-0810 5+ Documents (More...)
Flat Washer 5310015530810 015530810,3001311 Active) Primary Buy RNCC 3 RNVC 2 DAC 2 3001311 https
Flat Washer 5310015530810 015530810,3001311 5310-01-553-0810 5310015530810 015530810 is a washer
Flat Washer 5310015530810 015530810,3001311 5310-01-553-0810 5310015530810 015530810 is a washer
to enable JavaScript in your web browser . 5985-20-004-3179Antenna Tripod5985200043179 200043179 3001311
NumberManufacturerStatus3001311 38921 - Allen-Vanguard Corporation (Active) Primary Buy RNCC 3 RNVC 2 DAC 2 3001311
Restrictions 5310-01-553-0810
5310-01-553-0810 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Approved Sources 5310-01-553-0810
- Part Number
- Manufacturer
- Status
- 3001311
- Manufacturer
- 1EFH8 - General Dynamics Land Systems - (Active)
- Primary Buy
- Primary Buy
DLA Procurement Analysis 5310-01-553-0810
Management Data 5310-01-553-0810
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Jul 2008
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Defense Logistics Agency (DS)
- I
- A
- Consolidated With 5310-01-549-7715
- A
NATO Stock Numbers Related to 5310-01-553-0810
Contracting Technical Data File (CTDF) 5310-01-553-0810 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: