Premium Information is available for this item - Upgrade for $1 a day
5310-01-549-7554
Flat Washer
5310015497554 015497554 12759-00367 43985 3001182 34880
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
16
Marketplace 5310-01-549-7554
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-549-7554 5+ Documents (More...)
(Identification) 1/3 NSN 5310-01-549-7554 (Identification) 2/3 NSN 5310-01-549-7554 (Identification
Quotation 43985 FLAT WASHER 76 EA NS Request Quotation 3001182 WASHER 1 EA NS Request Quotation Subscribe
how to enable JavaScript in your web browser . 5310-21-886-2402Flat Washer5310218862402 218862402 43985
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-549-7554 Flat Washer 5310015497554 015497554 a
/fsg-25/fsc-2540/dk
https//www.nsnlookup.com /fsg-25/fsc-2540/dk 2540-22-126-8322 Guide 2540221268322221268322,SL-34880
Flat Washer 5310015497554 015497554 Circuit Card Assembly 5998013702394013702394 34880 https//www.nsnlookup.com
/www.nsnlookup.com /fsg-59/fsc-5998 /us 5998-01-036-1134 Electrical 43985 /www.nsnlookup.com /fsg-59
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-549-7554 Flat Washer 5310015497554 015497554 a
https//www.nsnlookup.com /fsg-47/fsc-4720/us 4720-01-708-6466 Nonmetallic Hose Assembly 4720017086466 3001182
Flat Washer 5310015497554 015497554 01-549-7554 Flat Washer 5310015497554015497554 a https//www.nsnlookup.com
Restrictions 5310-01-549-7554
5310-01-549-7554 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-549-7554
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-549-7554
- US Army (A919)
- Effective Date:
- 1 Mar 2007
- Supplementary Receivers:
- AZ
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2008
- US Marine Corps (MC47)
- Effective Date:
- 1 Oct 2007
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2008
- Supplementary Collaborators:
- HD
- Canada (ZC01)
- Effective Date:
- 1 Sep 2007
- France (ZF01)
- Effective Date:
- 1 Apr 2013
- United Kingdom (ZK01)
- Effective Date:
- 1 Nov 2007
Approved Sources 5310-01-549-7554
- Part Number
- Manufacturer
- Status
- 43985
- Manufacturer
- 05573 - Barnes Group Inc. (Active)
- Primary Buy
- Primary Buy
- 3001182
- 1EFH8 - General Dynamics Land Systems - (Active)
- Secondary Buy
- Secondary Buy
- 34880
- 0Y3H3 - Fastenal Company (Active)
- Secondary Buy
- Secondary Buy
- 12759-00367
- 0Y3H3 - Fastenal Company (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5310-01-549-7554
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Material [MATT]
- Steel Overall
- Hole Diameter [AAUB]
- 13.0 Millimeters Nominal
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 24.0 Millimeters Nominal
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Blank Rectangular
- Thickness [ABNM]
- 3.3 Millimeters Nominal
- Special Features [FEAT]
- 12Mm Id X 24Mm Od: Din 6916 Structural Flat Washer
- End Item Identification [AGAV]
- Mrap Buffalo Mk2a2
- Part Name Assigned By Controlling Agency [CXCY]
- Washer Flat M12
Weapon Systems (WSDC) 5310-01-549-7554
DLA Procurement Analysis 5310-01-549-7554
- Last Stock Position:
- 14812 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-549-7554
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 5310-01-549-7554
Freight Information 5310-01-549-7554
5310-01-549-7554 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5310-01-549-7554 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5310-01-549-7554 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-01-549-7554 is not classified as a special type of cargo when transported by water. 5310-01-549-7554 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-549-7554
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5310-01-549-7554 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: