Premium Information is available for this item - Upgrade for $1 a day
5310-01-548-6426
Flat Washer
5310015486426 015486426 M12FWB 0158-BB1
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
5
Marketplace 5310-01-548-6426
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-548-6426 5+ Documents (More...)
5310-01-548-6426 RQST NE Updated Every Day 5310-01-548-6426 RQST Updated Every Day 5310-01-548-6426
fsc-5310/us 5310-01-548-6426 Flat Washer 5310015486426015486426,M12FWB M12FWB0158-BB1 A washer having
Upgrade your Account Upgrade 5310-01-550-0272Hexagon Plain Nut5310015500272 015500272 M08125SNB 0158-BB1
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-548-6426 Flat Washer 5310015486426 015486426
day Upgrade your Account Upgrade 5306-01-616-8185Machine Bolt5306016168185 016168185 M12175060H7B 0158-BB1
day Upgrade your Account Upgrade 5305-01-615-8134Tapping Screw5305016158134 01615813406050FCSTD 0158-BB1
day Upgrade your Account Upgrade 5306-01-615-8139Machine Bolt5306016158139 016158139 08130150H2Z 0158-BB1
your Account Upgrade 5310-01-576-0609Hexagon Self-Locking Nut5310015760609 015760609 M12175LN7M 0158-BB1
day Upgrade your Account Upgrade 5305-01-615-8134Tapping Screw5305016158134 016158134 06050FCSTD 0158-BB1
your Account Upgrade 5310-01-576-0609Hexagon Self-Locking Nut5310015760609 015760609 M12175LN7M 0158-BB1
Restrictions 5310-01-548-6426
5310-01-548-6426 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-548-6426
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-548-6426
- US Army (A920)
- Effective Date:
- 1 Feb 2007
- Supplementary Receivers:
- AZ
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2008
- US Marine Corps (MC47)
- Effective Date:
- 1 Feb 2007
- US Navy (N9BZ)
- Effective Date:
- 1 Jul 2008
- Supplementary Collaborators:
- GTHD
- Canada (ZC01)
- Effective Date:
- 1 Jun 2007
- United Kingdom (ZK01)
- Effective Date:
- 1 Jul 2007
Approved Sources 5310-01-548-6426
- Part Number
- Manufacturer
- Status
- M12FWB
- Manufacturer
- 36MV0 - The Shyft Group Usa, Inc (Active)
- Primary Buy
- Primary Buy
- M12FWB
- 8T496 - Spartan Motors Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 0158-BB1
- 36MV0 - The Shyft Group Usa, Inc (Active)
- Informational Drawing
- Informational Drawing
Weapon Systems (WSDC) 5310-01-548-6426
DLA Procurement Analysis 5310-01-548-6426
- Last Stock Position:
- 579 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-548-6426
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
Similar Supply Items to 5310-01-548-6426
Freight Information 5310-01-548-6426
5310-01-548-6426 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-548-6426 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-548-6426 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-01-548-6426 is not classified as a special type of cargo when transported by water. 5310-01-548-6426 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-548-6426
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5310-01-548-6426 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: