Premium Information is available for this item - Upgrade for $1 a day
5310-01-540-3407
Hexagon Plain Nut
5310015403407 015403407 12486400-523 93400149
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.) View more Hexagon Plain Nut
November 2023
1
Marketplace 5310-01-540-3407
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-540-3407 5+ Documents (More...)
015403407 5310-01-540-3407 5310015403407 015403407 is a nut, flat on top and bottom having 6 flat sides
015403407 5310-01-540-3407 5310015403407 015403407 is a nut, flat on top and bottom having 6 flat sides
19207 12486400-523 NUT,HEX 2 2 2 5 - 0 0 4 6 8 4 2 1 7 0 2 9 1 Z Z O A P 6 WASHER,LOCK 2 3 1 5
19207 12486400-523 ..NUT,HEX 2 2 2 5 - 0 0 4 6 8 4 2 1 7 0 2 9 1 Z Z O A P 9 ..WASHER,LOCK 4 3
-523 40 5 12486514-116 33 1 12486400-523 41 8 12486514 https//www.nsnlookup.com /equipment-intelligence
40 5 12486514-116 33 1 12486400-523 41 8 12486514 https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365
Restrictions 5310-01-540-3407
5310-01-540-3407 is a Hexagon Plain Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-540-3407
- US Army (A919)
- Effective Date:
- 1 May 2006
- Supplementary Receivers:
- AZ
Approved Sources 5310-01-540-3407
- Part Number
- Manufacturer
- Status
- 12486400-523
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Source Control
- Source Control
- 93400149
- 74410 - Saf-Holland, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-01-540-3407
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Nominal Thread Size [CQJX]
- 0.750 Inches
- Thread Quantity Per Inch [CMLP]
- 10
- Special Features [FEAT]
- Nha: Suspension Assy, P/N: 12486400
- End Item Identification [AGAV]
- 2330-01-508-7887 Trailer, Flat Bed
Weapon Systems (WSDC) 5310-01-540-3407
DLA Procurement Analysis 5310-01-540-3407
- Last Stock Position:
- 626 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-540-3407
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- AH
- LGM-30 MINUTEMAN
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5310-01-540-3407
Freight Information 5310-01-540-3407
5310-01-540-3407 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093470. A Sub NMFC of X. It has a NMFC Description of BOLTS/NUTS I/S. 5310-01-540-3407 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48940 which rates the freight between FCL and LCL. 5310-01-540-3407 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-540-3407 is not classified as a special type of cargo when transported by water. 5310-01-540-3407 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5310-01-540-3407 2 Records
Contracting Technical Data File (CTDF) 5310-01-540-3407 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: