Premium Information is available for this item - Upgrade for $1 a day
5310-01-538-8454
Flat Washer
5310015388454 015388454 9239370007 923937.0007 CV187210
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
June 2023
5
Marketplace 5310-01-538-8454
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-538-8454 1+ Documents (More...)
United States (US) 4. 5310-01-538-8454 Marketplace Restrictions Approved Sources Datasheet Management
RQST NE Updated Every Day 5310-01-538-8454 RQST Updated Every Day 5310-01-538-8454 RQST NE Related Documents
Restrictions 5310-01-538-8454
5310-01-538-8454 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-538-8454
- US Army (A919)
- Effective Date:
- 1 Aug 2006
- Supplementary Receivers:
- AZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Apr 2006
- Australia (ZA01)
- Effective Date:
- 1 Sep 2011
- United Kingdom (ZK01)
- Effective Date:
- 1 Mar 2011
Approved Sources 5310-01-538-8454
- Part Number
- Manufacturer
- Status
- 9239370007
- Manufacturer
- 1NWY2 - Independent Rough Terrain Center Llc (Active)
- Primary Buy
- Primary Buy
- 923937.0007
- U6F37 - Kalmar Limited (Active)
- Secondary Buy
- Secondary Buy
- 923937.0007
- ZAR27 - Kalmar Equipment (Australia) Pty Ltd (Active)
- Secondary Buy
- Secondary Buy
- CV187210
- KCQ24 - Tvs Supply Chain Solutions Limited (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5310-01-538-8454
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- End Item Identification [AGAV]
- Rough Terrain Container Handler
- Part Name Assigned By Controlling Agency [CXCY]
- Door Washer
Weapon Systems (WSDC) 5310-01-538-8454
DLA Procurement Analysis 5310-01-538-8454
- Last Stock Position:
- 45 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-538-8454
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5310-01-538-8454
Freight Information 5310-01-538-8454
5310-01-538-8454 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 097510. A Sub NMFC of X. It has a NMFC Description of WASHERS I/S CHROMIUM/NICKEL PLATED. 5310-01-538-8454 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55220 which rates the freight between FCL and LCL. 5310-01-538-8454 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-01-538-8454 is not classified as a special type of cargo when transported by water. 5310-01-538-8454 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-538-8454
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5310-01-538-8454 4 Records
Contracting Technical Data File (CTDF) 5310-01-538-8454 April 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: