Premium Information is available for this item - Upgrade for $1 a day
5310-01-533-4921
Flat Washer
5310015334921 015334921 88-20033-20B 88-20033
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-533-4921
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-533-4921 5+ Documents (More...)
(Identification) 1/3 NSN 5310-01-533-4921 (Identification) 2/3 NSN 5310-01-533-4921 (Identification
BUY NE FedMall Updated Every Day 5310-01-533-4921 RQST NE Updated Every Day 5310-01-533-4921 RQST
a solid or laminated cross-section and two Reed Relay 5945005653187 005653187,20033 -33C 88-20033 A
/www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-533-2936 Flat Washer 5310015332936 015332936 -10B 88-20033
/www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-533-2936 Flat Washer 5310015332936 015332936 -10B 88-20033
/www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-471-0640 Flat Washer 5310014710640 014710640 -11C 88-20033
-19C 88-20033 A washer having a centrally located hole with a solid or laminated cross-section and two
-19C WASHER,FLAT RQST NS Request Quotation Subscribe to View Vendor Details... 88-20033-19C WASHER,FLAT
A washer having a centrally located hole with a solid or laminated cross-section and two -33C 88-20033
Flat Washer 5310015334921 015334921 -20B 88-20033 A washer having a centrally located hole with
Restrictions 5310-01-533-4921
5310-01-533-4921 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-533-4921
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-533-4921
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- CL
Approved Sources 5310-01-533-4921
- Part Number
- Manufacturer
- Status
- 88-20033-20B
- Manufacturer
- 30554 - Department Of Defense Project (Active)
- Primary Buy
- Primary Buy
- 88-20033
- 30554 - Department Of Defense Project (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5310-01-533-4921
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Material [MATT]
- Copper Alloy Overall
- Material Document And Classification [MDCL]
- Astm B 36 National Spec Single Material Response Overall
- Hole Diameter [AAUB]
- 0.281 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 0.625 Inches Nominal
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Thickness [ABNM]
- 0.065 Inches Nominal
- End Item Identification [AGAV]
- 6115-01-296-1463; Generator Set, Diesel Engine
- Part Name Assigned By Controlling Agency [CXCY]
- Washer, Flat
DLA Procurement Analysis 5310-01-533-4921
Management Data 5310-01-533-4921
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5310-01-533-4921
Freight Information 5310-01-533-4921
5310-01-533-4921 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-533-4921 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-533-4921 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-533-4921 is not classified as a special type of cargo when transported by water. 5310-01-533-4921 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-533-4921 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: