Premium Information is available for this item - Upgrade for $1 a day
5310-01-528-0326
Key Washer
5310015280326 015280326 200-1003-235
A washer of nonresilient material usually having two parallel bearing surfaces. The outside and/or inside edges have one or more protuberances. The ends and/or edges may be prebent at any angle or the protuberances may be prebent at any angle to the bearing surfaces. The keys or lugs may be fitted into keyways in adjacent material or they may be bent over after application to hold or lock one or more items in place. Excludes thrust type washer. View more Key Washer
November 2023
1
Marketplace 5310-01-528-0326
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-528-0326 1+ Documents (More...)
Restrictions 5310-01-528-0326
5310-01-528-0326 is a Key Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-528-0326
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-528-0326
- US Air Force (FUGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FUKZ
Approved Sources 5310-01-528-0326
- Part Number
- Manufacturer
- Status
- 200-1003-235
- Manufacturer
- 0D0V6 - Cooper Interconnect, Inc. (Replaced)
- Original Design
- Original Design
- 200-1003-235
- 77820 - Amphenol Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 200-1003-235
- 99447 - Cooper Interconnect, Inc. (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5310-01-528-0326
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Distance From Centerline To Top Of Internal Key [ABLQ]
- 0.280 Inches Minimum And 0.285 Inches Maximum
- End Item Identification [AGAV]
- Engine
- Hole Diameter [AAUB]
- 0.627 Inches Minimum And 0.631 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-C-533, Alloy 172, Temper H Fed Spec Single Material Response Overall
- Material Thickness [ABPX]
- 0.035 Inches Minimum And 0.039 Inches Maximum
- Outside Diameter [ABKV]
- 0.730 Inches Minimum And 0.735 Inches Maximum
- Material [MATT]
- Copper Alloy 172 Overall
- Internal Key Quantity [ABMR]
- 1
- Internal Straight Key Width [ABLJ]
- 0.070 Inches Minimum And 0.076 Inches Maximum
- Part Name Assigned By Controlling Agency [CXCY]
- Washer, Thrust
- Style Designator [STYL]
- Key
- Surface Treatment Document And Classification [STDC]
- Mil-L-8937 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Disulfide Molybdenum Overall
Weapon Systems (WSDC) 5310-01-528-0326
DLA Procurement Analysis 5310-01-528-0326
- Last Stock Position:
- 45 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-528-0326
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5310-01-528-0326
Freight Information 5310-01-528-0326
5310-01-528-0326 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-528-0326 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-528-0326 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-528-0326 is not classified as a special type of cargo when transported by water. 5310-01-528-0326 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-528-0326
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-01-528-0326 1 Records
Contracting Technical Data File (CTDF) 5310-01-528-0326 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: