Premium Information is available for this item - Upgrade for $1 a day
5310-01-526-3331
Flat Washer
5310015263331 015263331 03002B6014 67757 90965A170 100-110289
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
11
Marketplace 5310-01-526-3331
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-526-3331 5+ Documents (More...)
Updated Every Day 5310-01-526-3331 RQST NE Updated Every Day 5310-01-526-3331 RQST Updated Every Day
5310-01-526-3331 RQST NE Related Documents 5310-01-526-3331 5+ Documents ( More... ) https//www.nsnlookup.com
Day 4935-00-408-2017 RQST NE Related Documents https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-526-3331
Flat Washer 5310015263331 015263331 5310/us 5310-01-526-3331 Flat Washer 5310015263331015263331
0067757 BS- 677573 BSL-67757 Managed by Germany NSN Created on 4 Jul 1985 Data Last Changed January
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-526-3331 Flat Washer 5310015263331 015263331 $1
day Upgrade your Account Upgrade 5996-00-499-1438Electronic Control Amplifier5996004991438 004991438 67757
Trockenaut Luefter 3510123042666123042666 7113Current https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-526-3331
Flat Washer 5310015263331 015263331 Restrictions 3510-99-785-1716 DEMIL: | DEMILI : | CRITICALITY
Restrictions 5310-01-526-3331
5310-01-526-3331 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-526-3331
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-526-3331
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZBD
- US Air Force (FGGI)
- Effective Date:
- 1 Jun 2015
- US Marine Corps (MC47)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Jul 2007
- Supplementary Collaborators:
- GTHD
- Australia (ZA01)
- Effective Date:
- 1 Jul 2012
- Canada (ZC01)
- Effective Date:
- 1 Aug 2007
Approved Sources 5310-01-526-3331
- Part Number
- Manufacturer
- Status
- 03002B6014
- Manufacturer
- 01365 - Marine Corps Systems Command (Active)
- Primary Buy
- Primary Buy
- 67757
- 3MJN0 - Trimble Inc (Active)
- Secondary Buy
- Secondary Buy
- 90965A170
- 39428 - Mcmaster-Carr Supply Co (Active)
- Secondary Buy
- Secondary Buy
- 100-110289
- L8766 - Stryten Canada Inc (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5310-01-526-3331
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Material [MATT]
- Steel Comp 316 Overall
- Hardness Rating [CQFM]
- 70.0 Rockwell B Nominal
- End Item Identification [AGAV]
- Tactical Water Purification System (Twps) Nsn 4610-01-488-9656
Weapon Systems (WSDC) 5310-01-526-3331
DLA Procurement Analysis 5310-01-526-3331
- Last Stock Position:
- 39900 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-526-3331
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- MM
- F-86 SABRE
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5310-01-526-3331
Freight Information 5310-01-526-3331
5310-01-526-3331 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194130. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/MAINT I/C ENG. 5310-01-526-3331 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-526-3331 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-01-526-3331 is not classified as a special type of cargo when transported by water. 5310-01-526-3331 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-526-3331
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-01-526-3331 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A623PA663
- 24 Jan 2023
- Subscribe
- 495
- Subscribe
- Subscribe
- Subscribe
- SPE4A622P5737
- 30 Nov 2021
- Subscribe
- 2
- Subscribe
- Subscribe
- Subscribe
- SPE4A622P4084
- 17 Nov 2021
- Subscribe
- 201
- Subscribe
- Subscribe
- Subscribe
- SPE5E719V0473
- 23 Oct 2018
- Subscribe
- 127
- Subscribe
- Subscribe
- Subscribe
- SPE5E716V2628
- 01 Apr 2016
- Subscribe
- 71
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5310-01-526-3331 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: