Premium Information is available for this item - Upgrade for $1 a day
5310-01-526-1890
Flat Washer
5310015261890 015261890 BACW10CA12CVU BACW10CA
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
2
Marketplace 5310-01-526-1890
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-526-1890 5+ Documents (More...)
Flat Washer 5310015261890 015261890 day Upgrade your Account Upgrade 5310-01-526-1890Flat Washer5310015261890
015261890 BACW10CA12CVU BACW10CA 0548 Convex Washer 5310011050548 011050548 Max,Color NaturalSpecification
/fsg-53/fsc-5310/us
Restrictions 5310-01-526-1890
5310-01-526-1890 is a Flat Washer that does not have a nuclear hardened feature, but does have another critical feature or features such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-526-1890
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-526-1890
- US Air Force (FGGI)
- Effective Date:
- 1 Jan 2011
- Former MOE Rule:
- FGKE
- US Navy (N9BZ)
- Effective Date:
- 1 Jan 2011
- Supplementary Collaborators:
- GTKE
Approved Sources 5310-01-526-1890
- Part Number
- Manufacturer
- Status
- BACW10CA12CVU
- Manufacturer
- 77272 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- BACW10CA12CVU
- 81205 - The Boeing Company (Active)
- Secondary Buy
- Secondary Buy
- BACW10CA
- 81205 - The Boeing Company (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5310-01-526-1890
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Material [MATT]
- Steel Corrosion Resisting Overall
- Material Document And Classification [MDCL]
- Ams 2416 Fed Spec Single Material Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Surface Treatment Document And Classification [STDC]
- Qq-P-35,Type 11,Type V1 Or Type 111 Fed Spec Single Treatment Response Overall
- Hole Diameter [AAUB]
- 0.911 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 1.300 Inches Nominal
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Thickness [ABNM]
- 0.215 Inches Nominal
- Criticality Code Justification [CRTL]
- Agav
- End Item Identification [AGAV]
- Item Used On Mv-22 Aircraft
Weapon Systems (WSDC) 5310-01-526-1890
DLA Procurement Analysis 5310-01-526-1890
- Last Stock Position:
- 243 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-526-1890
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- NV
- JOINT VERTICAL LIFT AIRCRAFT CV-22 (OSPREY)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- V2
- MV-22 Aircraft
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 5310-01-526-1890
Freight Information 5310-01-526-1890
5310-01-526-1890 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-526-1890 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-526-1890 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-526-1890 is not classified as a special type of cargo when transported by water. 5310-01-526-1890 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-526-1890 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: