Premium Information is available for this item - Upgrade for $1 a day
5310-01-508-0111
Flat Washer
5310015080111 015080111 400-66A-03-01 ADV-852D ITEM 59 ADV-852D
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
3
Marketplace 5310-01-508-0111
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-508-0111 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5310-01-508-0111 RQST NE Updated Every Day 5310-01-508-0111 RQST
Updated Every Day 5310-01-508-0111 RQST NE Related Documents 5310-01-508-0111 5+ Documents ( More...
ITEM 28 ADV-852D A circular item, usually having a flat or grooved flange, boss(es), and/or counterbore
ITEM 34 ADV-852D A washer having a centrally located hole with a solid or laminated cross-section and
A washer having a centrally located hole with a solid or laminated cross-section and ITEM 34 ADV-852D
A washer having a centrally located hole with a solid or laminated cross-section and ITEM 34 ADV-852D
Flat Washer 5310015080111 015080111 United States (US) 4. 5310-01-508-0111 Marketplace Restrictions
Approved Sources Datasheet Management BUY NE FedMall Updated Every Day 5310-01-508-0111 RQST NE Updated
ITEM 32 ADV-852D A cylindrical item of various configurations which reciprocates in a valve body, assisting
ITEM 34 ADV-852D A washer having a centrally located hole with a solid or laminated cross-section and
Restrictions 5310-01-508-0111
5310-01-508-0111 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-508-0111
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-508-0111
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
- Australia (ZA01)
- Effective Date:
- 1 May 2007
Approved Sources 5310-01-508-0111
- Part Number
- Manufacturer
- Status
- ADV-852D ITEM 59
- Manufacturer
- 14561 - Magnatrol Valve Corp (Active)
- Original Design
- Original Design
- 400-66A-03-01
- 14561 - Magnatrol Valve Corp (Active)
- Secondary Buy
- Secondary Buy
- ADV-852D
- 14561 - Magnatrol Valve Corp (Active)
- Informational Drawing
- Informational Drawing
DLA Procurement Analysis 5310-01-508-0111
Management Data 5310-01-508-0111
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-01-508-0111
Freight Information 5310-01-508-0111
5310-01-508-0111 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-508-0111 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-508-0111 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-508-0111 is not classified as a special type of cargo when transported by water. 5310-01-508-0111 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-508-0111 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: