Premium Information is available for this item - Upgrade for $1 a day
5310-01-507-2829
Flat Washer
5310015072829 015072829 AP50C8
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
3
Marketplace 5310-01-507-2829
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-507-2829 3+ Documents (More...)
Updated Every Day 5310-01-507-2829 RQST NE Updated Every Day 5310-01-507-2829 RQST Updated Every Day
5310-01-507-2829 RQST NE Related Documents 5310-01-507-2829 2+ Documents ( More... ) https//www.nsnlookup.com
Flat Washer 5310015072829 015072829,AP50C8 Upgrade for $1 a day Upgrade your Account Upgrade 5310
-01-507-2829Flat Washer5310015072829 015072829 AP50C8 AP50C8 A washer having a centrally located hole
AP50C8 GASKET 3 EA NS Request Quotation Subscribe to View Vendor Details...
AP50C8 SEAL,CONICAL,FLARED TUBE FITTING 8 EA NS Request Quotation Updated Every Day 4730-00-432-4884
Restrictions 5310-01-507-2829
5310-01-507-2829 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. The DCMO has forced the Demilization requirements for this item as the ICP has not collaborated. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-507-2829
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-507-2829
- US Air Force (FGGI)
- Effective Date:
- 1 Apr 2014
- US Air Force (FGKE)
- Effective Date:
- 24 Nov 2013
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2014
- Supplementary Collaborators:
- GGKE
Approved Sources 5310-01-507-2829
- Part Number
- Manufacturer
- Status
- AP50C8
- Manufacturer
- 56529 - Hydraulics International, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-01-507-2829
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Material [MATT]
- Copper Overall
- Special Features [FEAT]
- Item Also Known As Copper Washer - 8, Ai
Weapon Systems (WSDC) 5310-01-507-2829
DLA Procurement Analysis 5310-01-507-2829
- Last Stock Position:
- 12 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-507-2829
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- NV
- JOINT VERTICAL LIFT AIRCRAFT CV-22 (OSPREY)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- V2
- MV-22 Aircraft
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 5310-01-507-2829
Freight Information 5310-01-507-2829
5310-01-507-2829 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-507-2829 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5310-01-507-2829 is rated as a variable freight class when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-507-2829 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-507-2829 is not classified as a special type of cargo when transported by water. 5310-01-507-2829 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5310-01-507-2829 1 Records
Contracting Technical Data File (CTDF) 5310-01-507-2829 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Y
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: