Premium Information is available for this item - Upgrade for $1 a day
5310-01-494-8595
Flat Washer
5310014948595 014948595 13770 97-401
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
June 2023
1
Marketplace 5310-01-494-8595
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-494-8595 5+ Documents (More...)
for $1 a day Upgrade your Account Upgrade 5310-01-494-8589Flat Washer5310014948589 014948589 13768 97-401
how to enable JavaScript in your web browser . 2540-37-401-0130Mandle2540374010130 374010130 2540-97-401
for $1 a day Upgrade your Account Upgrade 5310-01-494-8589Flat Washer5310014948589 014948589 13768 97-401
NumberManufacturerStatus13768 01084 - Silver Eagle Manufacturing Co (Active) Primary Buy RNCC 3 RNVC 2 DAC F 97-401
Upgrade for $1 a day Upgrade your Account Upgrade 3020-01-494-9938Gear3020014949938 014949938 13767 97-401
for $1 a day Upgrade your Account Upgrade 5310-01-494-8589Flat Washer5310014948589 014948589 13768 97-401
for $1 a day Upgrade your Account Upgrade 5310-01-494-8589Flat Washer5310014948589 014948589 13768 97-401
for $1 a day Upgrade your Account Upgrade 5310-01-494-8589Flat Washer5310014948589 014948589 13768 97-401
Restrictions 5310-01-494-8595
5310-01-494-8595 is a Flat Washer Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5310-01-494-8595
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Jun 2007
Approved Sources 5310-01-494-8595
- Part Number
- Manufacturer
- Status
- 13770
- Manufacturer
- 01084 - Silver Eagle Manufacturing Co (Active)
- Primary Buy
- Primary Buy
- 97-401
- 01084 - Silver Eagle Manufacturing Co (Active)
- Informational Drawing
- Informational Drawing
DLA Procurement Analysis 5310-01-494-8595
Management Data 5310-01-494-8595
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 5310-01-494-8595
Freight Information 5310-01-494-8595
5310-01-494-8595 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-494-8595 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-494-8595 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-494-8595 is not classified as a special type of cargo when transported by water. 5310-01-494-8595 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-494-8595 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: