Premium Information is available for this item - Upgrade for $1 a day
5310-01-484-4776
Flat Washer
5310014844776 014844776 CC-0009564 ST01238X883 CV174380 2876
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2024
4
Marketplace 5310-01-484-4776
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-484-4776 5+ Documents (More...)
... 2876 WASHER,FLAT 104 EA NS Request Quotation Subscribe to View Vendor Details... 2876 WASHER,FLAT
1 EA NS Request Quotation Updated Every Day 5310-01-484-4776 RQST NE Updated Every Day 5310-01-484-4776
Restrictions 5310-01-484-4776
5310-01-484-4776 is a Flat Washer Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-484-4776
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- MC10
- United Kingdom (ZK01)
- Effective Date:
- 1 Nov 2010
Approved Sources 5310-01-484-4776
- Part Number
- Manufacturer
- Status
- CC-0009564
- Manufacturer
- 1NWY2 - Independent Rough Terrain Center Llc (Active)
- Primary Buy
- Primary Buy
- 2876
- 1NWY2 - Independent Rough Terrain Center Llc (Active)
- Original Design
- Original Design
- ST01238X883
- K7325 - Dando Drilling International Ltd (Active)
- Secondary Buy
- Secondary Buy
- CV174380
- KCQ24 - Tvs Supply Chain Solutions Limited (Active)
- Secondary Buy
- Secondary Buy
Weapon Systems (WSDC) 5310-01-484-4776
DLA Procurement Analysis 5310-01-484-4776
Management Data 5310-01-484-4776
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- US Marine Corps (DM)
- EA
- Subscribe
- EA
- Oct 2021
- Defense Logistics Agency (DS)
- EA
- Subscribe
- EA
- Oct 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- EA
- Oct 2019
- Department of the Army (DA)
- EA
- Subscribe
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Defense Logistics Agency (DS)
- I
- R
- Refer To 3990-01-473-3998
- 3990-01-473-3998
- R
- Defense Logistics Agency (DS)
- I
- R
- Refer To Cage 1Nwy2
- CAGE 1NWY2
- R
- Defense Logistics Agency (DS)
- I
- R
- Refer To P/N Tra240-55S3m
- P/N TRA240-55S3M
- R
- Defense Logistics Agency (DS)
- I
- R
- Refer To Rtch Model Rt 240
- RTCH MODEL RT 240
- R
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5310-01-484-4776
Freight Information 5310-01-484-4776
5310-01-484-4776 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-484-4776 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-484-4776 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-484-4776 is not classified as a special type of cargo when transported by water. 5310-01-484-4776 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-484-4776
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-01-484-4776 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE7L121FA6AP
- 19 Apr 2021
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPE7L121FA6AP
- 19 Apr 2021
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPE7L118FA73U
- 23 Feb 2018
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPM75001D970533JQ
- 04 Sep 2013
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPM75001D970533AR
- 22 Aug 2013
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5310-01-484-4776 April 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: