Premium Information is available for this item - Upgrade for $1 a day
5310-01-483-0361
Recessed Washer
5310014830361 014830361 MS21299C3K MS21299-C3K 5310PL2130061
A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes WASHER, CONCAVE, RETAINER, PACKING, and thrust type washers. See also SPACER, SLEEVE; and SPACER, STEPPED. View more Recessed Washer
November 2023
12
Marketplace 5310-01-483-0361
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-483-0361 1+ Documents (More...)
MS21299C3K WASHER,RECESSED 2 EA NS Request Quotation Subscribe to View Vendor Details...
MS21299C3K WASHER,RECESSED 545 EA NS Request Quotation Updated Every Day 5310-01-483-0361 RQST NE Updated
Restrictions 5310-01-483-0361
5310-01-483-0361 is a Recessed Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-483-0361
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-483-0361
- US Army (A919)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- BD
- US Coast Guard (C919)
- Effective Date:
- 1 Feb 2016
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2013
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2007
- Supplementary Collaborators:
- GTKE
- Lithuania (WI01)
- Effective Date:
- 1 Jan 2010
- Bulgaria (WU01)
- Effective Date:
- 1 Feb 2010
- Brazil (YA01)
- Effective Date:
- 1 May 2012
- Australia (ZA01)
- Effective Date:
- 1 Feb 2014
- Greece (ZU01)
- Effective Date:
- 1 May 2008
Approved Sources 5310-01-483-0361
- Part Number
- Manufacturer
- Status
- MS21299C3K
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- MS21299C3K
- A0170 - Leonardo Spa Aerostructure Division (Active)
- Secondary Buy
- Secondary Buy
- MS21299-C3K
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 5310PL2130061
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
Datasheet 5310-01-483-0361
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- End Item Identification [AGAV]
- 1055-01-450-4243;Launcher,Rocket,Armored Vehicle Mounted:Multiple Launch Rocket System
- Hardness Rating [CQFM]
- 35.0 Rockwell C Minimum And 42.0 Rockwell C Maximum
- Hole Diameter [AAUB]
- 0.191 Inches Minimum And 0.195 Inches Maximum
- Material Thickness [ABPX]
- 0.057 Inches Minimum And 0.069 Inches Maximum
- Material [MATT]
- Steel Comp 630 Overall
- Outside Diameter [ABKV]
- 0.377 Inches Minimum And 0.387 Inches Maximum
- Material Document And Classification [MDCL]
- Ams 5604,17-4Ph Assn Std Single Material Response Overall
- Recess Angle [CSTM]
- 90.0 Degrees Nominal
- Recess Diameter [ABMD]
- 0.280 Inches Minimum And 0.290 Inches Maximum
- Specification/Standard Data [ZZZK]
- 80205-Nas-21299 Professional/Industrial Association Standard
- Style Designator [STYL]
- Recessed
- Surface Finish [CSYM]
- 125.0 Microinches All Surfaces
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
Weapon Systems (WSDC) 5310-01-483-0361
DLA Procurement Analysis 5310-01-483-0361
- Last Stock Position:
- 229 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-483-0361
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Apr 2023
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2022
- US Marine Corps (DM)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Jan 2021
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Apr 2020
- US Marine Corps (DM)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SO
- SPECIAL OPERATIONAL FORCES (SOF) PECULIAR
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 5310-01-483-0361
Freight Information 5310-01-483-0361
5310-01-483-0361 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-483-0361 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-483-0361 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 5310-01-483-0361 is not classified as a special type of cargo when transported by water. 5310-01-483-0361 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-483-0361
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 16.0" H x 4.0" W x 2.0" L
- --
- --
- Physical Protection
- Any Suitable Process
- 16.0" H x 4.0" W x 2.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5310-01-483-0361 8 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A523P4496
- 05 Jul 2023
- Subscribe
- 2014
- Subscribe
- Subscribe
- Subscribe
- SPE5E817V2053
- 13 Dec 2016
- Subscribe
- 371
- Subscribe
- Subscribe
- Subscribe
- SPE5E817V1488
- 17 Nov 2016
- Subscribe
- 2095
- Subscribe
- Subscribe
- Subscribe
- SPE5E817V0314
- 12 Oct 2016
- Subscribe
- 727
- Subscribe
- Subscribe
- Subscribe
- SPE5E816M4474
- 30 Jun 2016
- Subscribe
- 1827
- Subscribe
- Subscribe
- Subscribe
- SPE5E816V0922
- 05 Nov 2015
- Subscribe
- 1137
- Subscribe
- Subscribe
- Subscribe
- SPE5E814V8329
- 15 Aug 2014
- Subscribe
- 725
- Subscribe
- Subscribe
- Subscribe
- SPM5E813V1823
- 20 Mar 2013
- Subscribe
- 323
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5310-01-483-0361 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: