Premium Information is available for this item - Upgrade for $1 a day
5310-01-482-6518
Air Recessed Washer
5310014826518 014826518 NASM14183 MS14183L-C10
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
6
Marketplace 5310-01-482-6518
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-482-6518 5+ Documents (More...)
Air Recessed Washer 5310014826518 014826518 MS14183LC10 WASHER,RECESSED,AIR 300 EA NS Request Quotation
MS14183LC10 WASHER,RECESSED,AIR 7 EA NS Request Quotation Updated Every Day 5310-01-482-6518 RQST NE
$1 a day Upgrade your Account Upgrade 5310-01-473-3787Recessed Air Washer5310014733787 014733787 NASM14183
$1 a day Upgrade your Account Upgrade 5310-01-472-4362Air Recessed Washer5310014724362 014724362 NASM14183
$1 a day Upgrade your Account Upgrade 5310-01-473-3787Recessed Air Washer5310014733787 014733787 NASM14183
$1 a day Upgrade your Account Upgrade 5310-01-472-4362Air Recessed Washer5310014724362 014724362 NASM14183
$1 a day Upgrade your Account Upgrade 5310-01-472-4362Air Recessed Washer5310014724362 014724362 NASM14183
for $1 a day Upgrade your Account Upgrade 5310-01-470-9718Recessed Washer5310014709718 014709718 NASM14183
$1 a day Upgrade your Account Upgrade 5310-01-473-3787Recessed Air Washer5310014733787 014733787 NASM14183
$1 a day Upgrade your Account Upgrade 5310-01-472-4362Air Recessed Washer5310014724362 014724362 NASM14183
Restrictions 5310-01-482-6518
5310-01-482-6518 is a Air Recessed Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-482-6518
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-482-6518
- US Air Force (FGGI)
- Effective Date:
- 1 Nov 2013
- Former MOE Rule:
- FGKE
- US Navy (N9BZ)
- Effective Date:
- 1 Nov 2013
- Former MOE Rule:
- N1R5
- Supplementary Collaborators:
- GGKE
- Singapore (YJ01)
- Effective Date:
- 1 Nov 2007
- Australia (ZA01)
- Effective Date:
- 1 Aug 2008
- Republic of Korea (ZH01)
- Effective Date:
- 1 Jul 2003
Approved Sources 5310-01-482-6518
- Part Number
- Manufacturer
- Status
- NASM14183
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- MS14183L-C10
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- MS14183L-C10
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-01-482-6518
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Hole Diameter [AAUB]
- 0.627 Inches Minimum And 0.631 Inches Maximum
- Material Thickness [ABPX]
- 0.099 Inches Minimum And 0.119 Inches Maximum
- Material [MATT]
- Nickel Alloy 718 Overall
- Outside Diameter [ABKV]
- 1.153 Inches Minimum And 1.163 Inches Maximum
- Material Document And Classification [MDCL]
- Ams 5596 Assn Std Single Material Response Overall Or Ams 5597 Assn Std Single Material Response Overall Or Ams 5662 Assn Std Single Material Response Overall
- Recess Angle [CSTM]
- 90.0 Degrees Nominal
- Recess Diameter [ABMD]
- 0.764 Inches Minimum And 0.774 Inches Maximum
- Style Designator [STYL]
- Recessed
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
Weapon Systems (WSDC) 5310-01-482-6518
DLA Procurement Analysis 5310-01-482-6518
- Last Stock Position:
- 1071 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-482-6518
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- NV
- JOINT VERTICAL LIFT AIRCRAFT CV-22 (OSPREY)
- Price Validation Code:
- E
- The current standard price is an estimated price.
Estimated Price challenges are allowed but follow procedures in para 60.b. (3) of section L of this manual.
This code will be changed to a P code upon notification of a contract price or this code will be changed to an updated code upon determination of a valid price.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- QE
- Fighter Aircraft - First (F18 E/F)
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 5310-01-482-6518
Freight Information 5310-01-482-6518
5310-01-482-6518 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-482-6518 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-482-6518 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-482-6518 is not classified as a special type of cargo when transported by water. 5310-01-482-6518 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5310-01-482-6518 2 Records
Contracting Technical Data File (CTDF) 5310-01-482-6518 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: