Premium Information is available for this item - Upgrade for $1 a day
5310-01-481-9638
Flat Washer
5310014819638 014819638 122-2420529 PIECE 10 122-6818602 PC 47 122-6818601 PC 72 122-2420529 PIECE 100 2420529 6818602
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
4
Marketplace 5310-01-481-9638
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-481-9638 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5310-01-481-9638 RQST NE Updated Every Day 5310-01-481-9638 RQST
-2420529 PIECE 10122-6818602 PC 47122-6818601 PC 72122-2420529 PIECE 10024205296818602 A washer (Identification
PC 57 122-6818602 A metallic item, usually square or rectangular in cross section, usually longer in
PC 57122-6818602 A metallic item, usually square or rectangular in cross section, usually United States
PC 56 122-6818602 A solid metallic item, usually cylindrical, with or without a flange at one end.
A metallic item, usually square or rectangular in cross section, usually longer in PC 31 122-6818602
PC 37 122-6818602 A metallic item, usually square or rectangular in cross section, usually longer in
PC 37122-6818602 A metallic item, usually square or rectangular PC 57 122-6818602 A metallic item, usually
PC 31 122-6818602 A solid metallic item, usually cylindrical, with or without a flange at one end.
PC 31122-6818602 A solid metallic item, usually cylindrical https//www.nsnlookup.com /fsg-53/fsc-5315
Restrictions 5310-01-481-9638
5310-01-481-9638 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-481-9638
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-481-9638
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTHD
Approved Sources 5310-01-481-9638
- Part Number
- Manufacturer
- Status
- 122-2420529 PIECE 10
- Manufacturer
- 80064 - Naval Ship Systems Command (Active)
- Primary Buy
- Primary Buy
- 122-6818602 PC 47
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 122-6818601 PC 72
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 122-2420529 PIECE 100
- 53711 - Naval Sea Systems Command (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 2420529
- 53711 - Naval Sea Systems Command (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 6818602
- 53711 - Naval Sea Systems Command (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-01-481-9638
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Material [MATT]
- Steel Overall
- Hole Diameter [AAUB]
- 0.344 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 0.688 Inches Nominal
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Thickness [ABNM]
- 0.065 Inches Nominal
- End Item Identification [AGAV]
- Marine Hardware & Hull Doors
Weapon Systems (WSDC) 5310-01-481-9638
DLA Procurement Analysis 5310-01-481-9638
Management Data 5310-01-481-9638
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-01-481-9638
Freight Information 5310-01-481-9638
5310-01-481-9638 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-481-9638 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-481-9638 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5310-01-481-9638 is not classified as a special type of cargo when transported by water. 5310-01-481-9638 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-481-9638
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-481-9638 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: