Premium Information is available for this item - Upgrade for $1 a day
5310-01-481-3631
Flat Washer
5310014813631 014813631 122-5277698 ITEM 13 122-5277656 ITEM 27 5277656
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-481-3631
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-481-3631 5+ Documents (More...)
(Identification) 1/3 NSN 5310-01-481-3631 (Identification) 2/3 NSN 5310-01-481-3631 (Identification
located hole with a solid (Identification) 1/3 NSN 5310-01-481-3631 (Identification) 2/3 NSN 5310-01
www.nsnlookup.com /fsg-53/fsc-5306/us 5306-01-481-5716 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-481-3631
Flat Washer 5310014813631 014813631 Upgrade for $1 a day Upgrade your Account Upgrade 5310-01-481
/fsg-31/fsc-3120/us
/www.nsnlookup.com /fsg-31/fsc-3120/us 3120-01-482-2984 Sleeve Bearing 3120014822984014822984 122-5277656
for $1 a day Upgrade your Account Upgrade 3120-01-482-2984Sleeve Bearing3120014822984 014822984 122-5277656
Flat Washer 5310014813631 014813631 482-2984 Part NumberManufacturerStatus122-5277656 https//www.nsnlookup.com
a day Upgrade your Account Upgrade 5315-01-481-2301Headed Grooved Pin5315014812301 014812301 122-5277656
ITEM 45 122-5277656 An externally threaded fastener designed for insertion through holes in assembled
ITEM 45122-5277656 An externally threaded fastener designed for insertion through holes United States
Restrictions 5310-01-481-3631
5310-01-481-3631 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-481-3631
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-481-3631
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
Approved Sources 5310-01-481-3631
- Part Number
- Manufacturer
- Status
- 122-5277698 ITEM 13
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 122-5277656 ITEM 27
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 5277656
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5310-01-481-3631
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Material [MATT]
- Copper Alloy 675 Overall
- Material Document And Classification [MDCL]
- Qq-B-728,Cl A Fed Spec Single Material Response Overall
- Hole Diameter [AAUB]
- 0.780 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 2.000 Inches Nominal
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Thickness [ABNM]
- 0.080 Inches Nominal
DLA Procurement Analysis 5310-01-481-3631
Management Data 5310-01-481-3631
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-01-481-3631
Freight Information 5310-01-481-3631
5310-01-481-3631 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-481-3631 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-481-3631 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-481-3631 is not classified as a special type of cargo when transported by water. 5310-01-481-3631 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-481-3631 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: