Premium Information is available for this item - Upgrade for $1 a day
5310-01-481-2079
Flat Washer
5310014812079 014812079 124-1678549 PC 79 124-1678550 PC 19 1678550
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-481-2079
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-481-2079 5+ Documents (More...)
Flat Washer 5310014812079 014812079 Upgrade for $1 a day Upgrade your Account Upgrade 5310-01-481
-2079Flat Washer5310014812079 014812079 124-1678549 https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305
Flat Washer 5310014812079 014812079 Upgrade for $1 a day Upgrade your Account Upgrade 5310-01-481
-2079Flat Washer5310014812079 014812079 124-1678549 https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305
Flat Washer 5310014812079 014812079 Upgrade for $1 a day Upgrade your Account Upgrade 5310-01-481
-2079Flat Washer5310014812079 014812079 124-1678549 https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305
/fsg-31/fsc-3120/us
Flat Washer 5310014812079 014812079 for $1 a day Upgrade your Account Upgrade 5310-01-481-2079Flat
Washer5310014812079 014812079 124-1678549 PC https//www.nsnlookup.com /fsg-20/fsc-2040/us 2040-01-496
Restrictions 5310-01-481-2079
5310-01-481-2079 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-481-2079
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-481-2079
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
Approved Sources 5310-01-481-2079
- Part Number
- Manufacturer
- Status
- 124-1678549 PC 79
- Manufacturer
- 80064 - Naval Ship Systems Command (Active)
- Primary Buy
- Primary Buy
- 124-1678550 PC 19
- 80064 - Naval Ship Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 1678550
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5310-01-481-2079
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Material [MATT]
- Copper Alloy Overall
- Material Document And Classification [MDCL]
- Mil-B-24059 Mil Spec Single Material Response Overall
- Hole Diameter [AAUB]
- 1.641 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 3.375 Inches Nominal
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Thickness [ABNM]
- 0.188 Inches Nominal
- Surface Finish [CSYM]
- 125.0 Microinches Top
- Surface Finish [CSYM]
- 125.0 Microinches Bottom
- End Item Identification [AGAV]
- Hatch Cvr Po
DLA Procurement Analysis 5310-01-481-2079
Management Data 5310-01-481-2079
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-481-2079
Freight Information 5310-01-481-2079
5310-01-481-2079 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-481-2079 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-481-2079 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-481-2079 is not classified as a special type of cargo when transported by water. 5310-01-481-2079 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-481-2079 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: