Premium Information is available for this item - Upgrade for $1 a day
5310-01-478-8700
Flat Washer
5310014788700 014788700 3268987
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
22
Marketplace 5310-01-478-8700
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-478-8700 4+ Documents (More...)
United States (US) 4. 5310-01-478-8700 Marketplace Restrictions Approved Sources Datasheet Management
5310-01-478-8700 RQST Updated Every Day 5310-01-478-8700 RQST NE Related Documents 5310-01-478-8700 4
.. ) https//www.nsnlookup.com /fsg-59/fsc-5995/us 5995-01-319-01115995013190111 013190111,3268987 3268987
Flat Washer 5310014788700 014788700,3268987 Upgrade for $1 a day Upgrade your Account Upgrade 5310
Flat Washer 5310014788700 014788700,3268987 Agency (DS)IZDiscontinued-Use 5310-01-478-8700 https
ExpressionUS Marine Corps (DM)IZDiscontinued-Use 5310-01-478-8700US Marine Corps (DM)MZDiscontinued-Use 5310-01-478-8700
Flat Washer 5310014788700 014788700,3268987 for $1 a day Upgrade your Account Upgrade 5310 https
Navy (DN)NZDiscontinued-Use 5310-01-478-8700Defense Logistics Agency (DS)IZDiscontinued-Use 5310-01-478-8700
Restrictions 5310-01-478-8700
5310-01-478-8700 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-478-8700
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-478-8700
- US Army (A919)
- Effective Date:
- 1 Jan 2010
- Supplementary Receivers:
- AZ
- US Air Force (FGGI)
- Effective Date:
- 1 Jan 2010
- US Marine Corps (MC47)
- Effective Date:
- 1 Jan 2010
- Former MOE Rule:
- MM85
- US Navy (N9BZ)
- Effective Date:
- 1 Jan 2010
- Supplementary Collaborators:
- HD
- Canada (ZC01)
- Effective Date:
- 1 Apr 2014
- United Kingdom (ZK01)
- Effective Date:
- 1 Dec 2003
Approved Sources 5310-01-478-8700
- Part Number
- Manufacturer
- Status
- 3268987
- Manufacturer
- 75Q65 - Oshkosh Defense Llc (Active)
- Primary Buy
- Primary Buy
- 3268987
- 45152 - Oshkosh Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Weapon Systems (WSDC) 5310-01-478-8700
DLA Procurement Analysis 5310-01-478-8700
- Last Stock Position:
- 19162 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-478-8700
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Department of the Army (DA)
- EA
- Subscribe
- EA
- Oct 2021
- Defense Logistics Agency (DS)
- EA
- Subscribe
- EA
- Oct 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- EA
- Oct 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- US Marine Corps (DM)
- M
- 0
- Reversal Of Phrase Code Z 5310-01-539-6419
- 0
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5310-01-478-8700
Freight Information 5310-01-478-8700
5310-01-478-8700 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194130. A Sub NMFC of A. It has a NMFC Description of WASHERS/GASKETS/MAINT I/C ENG SUB1. 5310-01-478-8700 is rated as class 110 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-478-8700 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-01-478-8700 is not classified as a special type of cargo when transported by water. 5310-01-478-8700 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-478-8700
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5310-01-478-8700 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE7M118FAJXK
- 24 May 2018
- Subscribe
- 14641
- Subscribe
- Subscribe
- Subscribe
- SPE7M118FAEZD
- 11 May 2018
- Subscribe
- 7509
- Subscribe
- Subscribe
- Subscribe
- SPM7LX12D90068713
- 21 Aug 2015
- Subscribe
- 14831
- Subscribe
- Subscribe
- Subscribe
- SPM7LX12D90067209
- 21 Oct 2014
- Subscribe
- 7143
- Subscribe
- Subscribe
- Subscribe
- SPM7LX12D90064816
- 28 Aug 2013
- Subscribe
- 4159
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5310-01-478-8700 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: