Premium Information is available for this item - Upgrade for $1 a day
5310-01-477-4811
Flat Washer
5310014774811 014774811 8100-1256-0262 PC 59 8100-1256-0262
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-477-4811
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-477-4811 5+ Documents (More...)
(Identification) 1/3 NSN 5310-01-477-4811 (Identification) 2/3 NSN 5310-01-477-4811 (Identification
BUY NE FedMall Updated Every Day 5310-01-477-4811 RQST NE Updated Every Day 5310-01-477-4811 RQST
/fsg-31/fsc-3120/us
PC 42 8100-1256-0262 A tubular shaped unthreaded item with or without a flange at one end designed
/www.nsnlookup.com /fsg-31/fsc-3120/us 3120-01-477-9139 Sleeve Bushing 3120014779139014779139 8100-1256-0262
Flat Washer 5310014774811 014774811 PC 59 8100-1256-0262 A washer having a centrally located hole
An item of various cross-sectional shapes which may be of solid or hollow PT NO 221 8100-1256-0262
/fsg-31/fsc-3120/us
PT NO 240 8100-1256-0262 A tubular shaped unthreaded item with or without a flange at one end designed
/www.nsnlookup.com /fsg-31/fsc-3120/us 3120-01-481-2082 Sleeve Bushing 3120014812082014812082 8100-1256-0262
PC 69 8100-1256-0262 A headless item of various shapes, usually cylindrical, having either circular
airtight An item of various cross-sectional shapes which may be of solid or hollow PT NO 221 8100-1256-0262
Restrictions 5310-01-477-4811
5310-01-477-4811 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-477-4811
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-477-4811
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
Approved Sources 5310-01-477-4811
- Part Number
- Manufacturer
- Status
- 8100-1256-0262 PC 59
- Manufacturer
- 70876 - Bath Iron Works Corporation (Active)
- Primary Buy
- Primary Buy
- 8100-1256-0262
- 70876 - Bath Iron Works Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-01-477-4811
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Material [MATT]
- Copper Alloy 464 Overall
- Material Document And Classification [MDCL]
- Qq-B-639,Alloy 464 Fed Spec Single Material Response Overall
- Hole Diameter [AAUB]
- 0.641 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 1.500 Inches Nominal
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Thickness [ABNM]
- 0.125 Inches Nominal
- Surface Finish [CSYM]
- 125.0 Microinches All Surfaces
Weapon Systems (WSDC) 5310-01-477-4811
DLA Procurement Analysis 5310-01-477-4811
Management Data 5310-01-477-4811
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-477-4811
Freight Information 5310-01-477-4811
5310-01-477-4811 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-477-4811 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-477-4811 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-477-4811 is not classified as a special type of cargo when transported by water. 5310-01-477-4811 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5310-01-477-4811 2 Records
Contracting Technical Data File (CTDF) 5310-01-477-4811 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: