Premium Information is available for this item - Upgrade for $1 a day
5310-01-475-0940
Flat Washer
5310014750940 014750940 492-0033
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-475-0940
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-475-0940 5+ Documents (More...)
-01-492-0033 RQST Updated Every Day 2840-01-492-0033 RQST NE Restrictions 2840-01-492-0033 DEMIL: Q
/fsg-53/fsc-5310/us 5310-01-475-0940 Flat Washer 5310014750940 014750940,492-0033 Request Updated Every
RQST NE Related Documents 7690-00-492-0033 3+ Documents ( More RQST NE Related Documents 7690-00-492
5845214920033 214920033 /fsg-53/fsc-5310/us 5310-01-475-0940 Flat Washer 5310014750940 014750940,492
//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-475-0940 Flat Washer 5310014750940 014750940,492-0033
Request Updated Every Day 7690-00-492-0033 https//www.nsnlookup.com /fsg-58/fsc-5845/ca 5845-21-492-
-01-492-0033 RQST Updated Every Day 2840-01-492-0033 RQST NE Restrictions 2840 https//www.nsnlookup.com
/fsg-53/fsc-5310/us 5310-01-475-0940 Flat Washer 5310014750940 014750940,492-0033 Documents 5310-01-
3960-14-492-0033 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-39/fsc-3960/fr 3960-14-492-0033
/fsg-53/fsc-5310/us 5310-01-475-0940 Flat Washer 5310014750940 014750940,492-0033 5310014750940 014750940,492
Restrictions 5310-01-475-0940
5310-01-475-0940 is a Flat Washer This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-475-0940
- National Security Agency (DGX1)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- DKZ1
- Supplementary Receivers:
- KZ
Approved Sources 5310-01-475-0940
- Part Number
- Manufacturer
- Status
- 492-0033
- Manufacturer
- 0GV52 - Schaffner E M C Inc (Active)
- Primary Buy
- Primary Buy
DLA Procurement Analysis 5310-01-475-0940
Management Data 5310-01-475-0940
Similar Supply Items to 5310-01-475-0940
Freight Information 5310-01-475-0940
5310-01-475-0940 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-475-0940 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-475-0940 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-475-0940 is not classified as a special type of cargo when transported by water. 5310-01-475-0940 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-475-0940
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- --
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5310-01-475-0940 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: