Premium Information is available for this item - Upgrade for $1 a day
5310-01-472-4585
Flat Washer
5310014724585 014724585 124-5563778 PC 16 2-3/4 OD X 1-25/32 ID X 1/8 THK 124-5563779 PC 68 5563778 5563779
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
August 2023
1
Marketplace 5310-01-472-4585
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-472-4585 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5310-01-472-4585 RQST NE Updated Every Day 5310-01-472-4585 RQST
-5563778 PC 162-3/4 OD X 1-25/32 ID X 1/8 THK124-5563779 PC 6855637785563779 A washer having (Identification
/fsg-31/fsc-3120/us
5070302208 5563779-3 A bent spring metal washer with a centrally located hole /3 D0914 - Kg (Active)
5070302208 5563779-3 A bent spring metal washer with a centrally located hole PC 65 5563779 A tubular
/fsg-53/fsc-5310/us
PC 11 30FA-1608-8 5563778 A nut having a flat bottom and 6 sides.
PC 14 5563778 A drive shaft with external thread(s) and with machined bearing surface(s& A deformable
PC 98HMS-H-632AY-98-1W6124-5563779 A headed cylindrically shaped item, having a solid United States
/fsg-53/fsc-5310/de 5310-12-187-7026 Spring Tension Washer 5310121877026 121877026 PC 60 124-5563779
PC 11 124-5563777 PC 11 124-5563779 A solid metallic item, usually cylindrical, with or without a flange
PC 11124-5563777 PC 11124-5563779 A solid metallic item, usually cylindrical, with or United States
Restrictions 5310-01-472-4585
5310-01-472-4585 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-472-4585
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-472-4585
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
Approved Sources 5310-01-472-4585
- Part Number
- Manufacturer
- Status
- 124-5563778 PC 16
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 2-3/4 OD X 1-25/32 ID X 1/8 THK
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 124-5563779 PC 68
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 5563778
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
- 5563779
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5310-01-472-4585
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Material [MATT]
- Copper Alloy 865 Overall
- Material Document And Classification [MDCL]
- Qq-C-390 Alloy 865 Fed Spec Single Material Response Overall
- Hole Diameter [AAUB]
- 1.781 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 2.750 Inches Nominal
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Thickness [ABNM]
- 0.125 Inches Nominal
- End Item Identification [AGAV]
- Hatch
Weapon Systems (WSDC) 5310-01-472-4585
DLA Procurement Analysis 5310-01-472-4585
Management Data 5310-01-472-4585
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-01-472-4585
Freight Information 5310-01-472-4585
5310-01-472-4585 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-472-4585 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-472-4585 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-472-4585 is not classified as a special type of cargo when transported by water. 5310-01-472-4585 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-472-4585
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5310-01-472-4585 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: