Premium Information is available for this item - Upgrade for $1 a day
5310-01-470-1381
Flat Washer
5310014701381 014701381 96-23612 DIN125ZY-16 96-23612-3 125AZY-16M
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
4
Marketplace 5310-01-470-1381
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-470-1381 5+ Documents (More...)
(Identification) 1/3 NSN 5310-01-470-1381 (Identification) 2/3 NSN 5310-01-470-1381 (Identification
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 96-23612
/fsg-59/fsc-5961/us
-4 125AZY-5M DIN 125A-ZY 5 A washer having a centrally located hole with a solid or DIN125ZY-16 96-23612
-3 125AZY-16M A washer having a centrally located hole with a solid or laminated DIN125ZY-16 96-23612
-4 125AZY-5M DIN 125A-ZY 5 A washer having a centrally located hole with a solid or DIN125ZY-16 96-23612
-3 125AZY-16M A washer having a centrally located hole with a solid or laminated https//www.nsnlookup.com
Flat Washer 5310014701381 014701381,96-23612 Upgrade for $1 a day Upgrade your Account Upgrade
5310-01-470-1381Flat Washer5310014701381 014701381 96-23612 DIN125ZY-16 96-23612-3 125AZY-16M A washer
Flat Washer 5310014701381 014701381,96-23612 Upgrade for $1 a day Upgrade your Account Upgrade
5310-01-470-1381Flat Washer5310014701381 014701381 96-23612 DIN125ZY-16 96-23612-3 125AZY-16M A washer
Restrictions 5310-01-470-1381
5310-01-470-1381 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-470-1381
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-470-1381
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZCL
- US Marine Corps (MC47)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Supplementary Collaborators:
- HD
Approved Sources 5310-01-470-1381
- Part Number
- Manufacturer
- Status
- DIN125ZY-16
- Manufacturer
- 15526 - Metric And Multistandard Components (Active)
- Primary Buy
- Primary Buy
- 96-23612-3
- 30554 - Department Of Defense Project (Active)
- Secondary Buy
- Secondary Buy
- DIN125ZY-16
- 48370 - Metric & Multistandard Components (Active)
- Secondary Buy
- Secondary Buy
- 125AZY-16M
- 15526 - Metric And Multistandard Components (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 125AZY-16M
- 48370 - Metric & Multistandard Components (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 96-23612
- 30554 - Department Of Defense Project (Active)
- Related Drawing
- Related Drawing
Datasheet 5310-01-470-1381
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Material [MATT]
- Steel Overall
- Surface Treatment [SFTT]
- Zinc Overall
- Color [HUES]
- Yellow Overall
- Hole Diameter [AAUB]
- 17.0 Millimeters Nominal
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 30.0 Millimeters Nominal
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Thickness [ABNM]
- 3.0 Millimeters Nominal
- End Item Identification [AGAV]
- 6115-01-462-0291;6115-01-461-9335
Weapon Systems (WSDC) 5310-01-470-1381
DLA Procurement Analysis 5310-01-470-1381
- Last Stock Position:
- 18 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-470-1381
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 5310-01-470-1381
Freight Information 5310-01-470-1381
5310-01-470-1381 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-470-1381 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-470-1381 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5310-01-470-1381 is not classified as a special type of cargo when transported by water. 5310-01-470-1381 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-470-1381
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-470-1381 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: