Premium Information is available for this item - Upgrade for $1 a day
5310-01-469-9356
Flat Washer
5310014699356 014699356 124-5200227 PC 34 5200227
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
4
Marketplace 5310-01-469-9356
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-469-9356 5+ Documents (More...)
(Identification) 1/3 NSN 5310-01-469-9356 (Identification) 2/3 NSN 5310-01-469-9356 (Identification
BUY NE FedMall Updated Every Day 5310-01-469-9356 RQST NE Updated Every Day 5310-01-469-9356 RQST
PC 14 5200227 A solid metallic item, usually cylindrical, with or without a flange at one end.
PC 20 5200227 A washer having a centrally located hole with a solid or laminated cross-section and two
PC 175200227 A gear, cylindrical or conical in form, with teeth on the outer surface used 124-5200227
day Upgrade your Account Upgrade 3020-01-469-9716Drive Motion Gear3020014699716 014699716 124-5200227
PC 29 124-5200227 OC 29 5200227 A washer having a centrally located hole with a solid or laminated cross-section
PC 29124-5200227 OC 295200227 A washer having a centrally located hole with a solid or (Identification
PC 33 124-5200227 A headless, generally cylindrically-shaped item having a straight, smooth, solid body
PC 33124-5200227 A headless, generally cylindrically-shaped item having a straight, smooth United States
Restrictions 5310-01-469-9356
5310-01-469-9356 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-469-9356
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-469-9356
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2014
- Supplementary Collaborators:
- HX
- United States of America (ZZ)
Approved Sources 5310-01-469-9356
- Part Number
- Manufacturer
- Status
- 124-5200227 PC 34
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 5200227
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5310-01-469-9356
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.8125 Inches Nominal
- Material [MATT]
- Steel Overall
- End Item Identification [AGAV]
- Scuttle;Nimitz Class Cvn
- Part Name Assigned By Controlling Agency [CXCY]
- Navy Special Project
- Material Document And Classification [MDCL]
- Ff-W-92 Fed Spec Single Material Response Overall
- Overall Diameter [ADAV]
- 1.500 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Surface Treatment [SFTT]
- Zinc Overall
- Thickness [ABNM]
- 0.108 Inches Nominal
DLA Procurement Analysis 5310-01-469-9356
Management Data 5310-01-469-9356
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-01-469-9356
Freight Information 5310-01-469-9356
5310-01-469-9356 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-469-9356 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-469-9356 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-469-9356 is not classified as a special type of cargo when transported by water. 5310-01-469-9356 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-469-9356 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: