Premium Information is available for this item - Upgrade for $1 a day
5310-01-469-2039
Flat Washer
5310014692039 014692039 12445
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
3
Marketplace 5310-01-469-2039
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-469-2039 5+ Documents (More...)
12445-1 F827-12445 -12445-1 F827-12445 A definite continuous length of CABLE, SPECIAL PURPOSE, ELECTRICAL
-12445 F827-12445 12445-1 F827-12445 -12445-1 F827-12445 A definite continuous length of CABLE, SPECIAL
-1 F827-12445 -12445-1 F827-12445 A definite -6175 5995016866175 016866175,PLF827-12445 F827-12445 -1
12445-1 F827-12445 -12445-1 F827-12445 A definite continuous length of CABLE, SPECIAL PURPOSE, -6175
12445-1 F827-12445 A definite continuous length 12445-1 F827-12445 -12445-1 F827-12445 A definite -6175
,PLF827-12445F827-12445 F827-12445-1 F827- 12445 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01
length 12445 -1 F827-12445 -12445-1 F827-12445 A definite -6175 5995016866175 001287961,12445 F827-12445
/fsg-53/fsc-5310/us 5310-01-469-2039 Flat Washer 5310014692039 014692039,12445 12445-1 F827-12445 -12445
A definite continuous length 12445 -1 F827-12445 -12445-1 F827-12445 A definite -6175 5995016866175
- Right Cockpit Panel -1 F827- 12445 -12445-1 F827-12445 https//www.nsnlookup.com 12445-1 Details...
Restrictions 5310-01-469-2039
5310-01-469-2039 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-469-2039
- US Coast Guard (C918)
- Effective Date:
- 1 Jan 2010
- France (ZF01)
- Effective Date:
- 1 Sep 2002
Approved Sources 5310-01-469-2039
- Part Number
- Manufacturer
- Status
- 12445
- Manufacturer
- 85013 - Laguna Pueblo Of (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-01-469-2039
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- End Item Identification [AGAV]
- In-Sink-Erator Commercial Disposer
DLA Procurement Analysis 5310-01-469-2039
Management Data 5310-01-469-2039
Similar Supply Items to 5310-01-469-2039
Freight Information 5310-01-469-2039
5310-01-469-2039 has freight characteristics managed by Australia.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-469-2039 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-469-2039 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-469-2039 is not classified as a special type of cargo when transported by water. 5310-01-469-2039 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-469-2039 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: