Premium Information is available for this item - Upgrade for $1 a day
5310-01-467-6295
Flat Washer
5310014676295 014676295 122-4735538 P/N 19 4735538
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
4
Marketplace 5310-01-467-6295
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-467-6295 5+ Documents (More...)
(Identification) 1/3 NSN 5310-01-467-6295 (Identification) 2/3 NSN 5310-01-467-6295 (Identification
BUY NE FedMall Updated Every Day 5310-01-467-6295 RQST NE Updated Every Day 5310-01-467-6295 RQST
us 5310-01-467-4652 Flat Washer 5310014674652 014674652 467-3216 Part NumberManufacturerStatus122-4735538
us 5310-01-467-4660 Flat Washer 5310014674660 014674660 467-3216 Part NumberManufacturerStatus122-4735538
. ) https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-467-5397 Shim 5365014675397014675397 122-4735538
us 5310-01-467-4652 Flat Washer 5310014674652 014674652 467-5065 Part NumberManufacturerStatus122-4735538
day Upgrade your Account Upgrade 3110-01-467-3216Bearing Retaining Plate3110014673216 014673216 122-4735538
day Upgrade your Account Upgrade 3110-01-467-3216Bearing Retaining Plate3110014673216 014673216 122-4735538
P/N 62 122-4735538 P/N 64 4735538 A nut, flat on top and bottom having 6 flat sides.
P/N 62122-4735538 P/N 644735538 A nut, flat on top and bottom having 6 flat sides.
Restrictions 5310-01-467-6295
5310-01-467-6295 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-467-6295
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-467-6295
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2014
- Supplementary Collaborators:
- HX
- United States of America (ZZ)
Approved Sources 5310-01-467-6295
- Part Number
- Manufacturer
- Status
- 122-4735538 P/N 19
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 4735538
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5310-01-467-6295
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hardness Rating [CQFM]
- 36.0 Rockwell C Minimum And 40.0 Rockwell C Maximum
- Hole Diameter [AAUB]
- 0.8125 Inches Nominal
- End Item Identification [AGAV]
- Cargo/Weapons Elevators
- Material [MATT]
- Steel Overall
- Part Name Assigned By Controlling Agency [CXCY]
- Navy Special Project
- Material Document And Classification [MDCL]
- Ams6415 Assn Std Single Material Response Or Ams6484 Assn Std Single Material Response Overall
- Overall Diameter [ADAV]
- 1.6875 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.0625 Inches Nominal
DLA Procurement Analysis 5310-01-467-6295
Management Data 5310-01-467-6295
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-01-467-6295
Freight Information 5310-01-467-6295
5310-01-467-6295 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-467-6295 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-467-6295 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-467-6295 is not classified as a special type of cargo when transported by water. 5310-01-467-6295 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-467-6295 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: