Premium Information is available for this item - Upgrade for $1 a day
5310-01-443-3714
Keyway Washer
5310014433714 014433714 FT1761-12P L352000302 NGR540ER12
A washer of nonresilient material usually having two parallel bearing surfaces. The outside and/or inside edges have one or more notches. Excludes thrust type washers. View more Keyway Washer
November 2023
9
Marketplace 5310-01-443-3714
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-443-3714 1+ Documents (More...)
FT1761-12P WASHER,KEYWAY 42 EA NS Request Quotation Updated Every Day 5310-01-443-3714 RQST NE Updated
Every Day 5310-01-443-3714 RQST Updated Every Day 5310-01-443-3714 RQST NE Related Documents 5310-01
Restrictions 5310-01-443-3714
5310-01-443-3714 is a Keyway Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. The DCMO has forced the Demilization requirements for this item as the ICP has not collaborated. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-443-3714
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-443-3714
- US Army (A919)
- Effective Date:
- 1 Nov 2011
- Supplementary Receivers:
- CT
- US Air Force (FGGI)
- Effective Date:
- 1 Jun 2012
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HDJBHX
- Greece (ZU01)
- Effective Date:
- 1 May 2008
Approved Sources 5310-01-443-3714
- Part Number
- Manufacturer
- Status
- FT1761-12P
- Manufacturer
- 58794 - Fastener Technology Corp (Active)
- Primary Buy
- Primary Buy
- NGR540ER12
- 26512 - Northrop Grumman Systems Corporation (Active)
- Original Design
- Original Design
- L352000302
- 36090 - Lockheed Martin Librascope (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5310-01-443-3714
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Hole Diameter [AAUB]
- 0.255 Inches Minimum And 0.265 Inches Maximum
- Material Document And Classification [MDCL]
- Mil-S-25043 Mil Spec Single Material Response Overall
- Material Thickness [ABPX]
- 0.030 Inches Minimum And 0.040 Inches Maximum
- Outside Diameter [ABKV]
- 0.380 Inches Minimum And 0.400 Inches Maximum
- Material [MATT]
- Steel Comp 631 Overall
- Internal Straight Key Width [ABLJ]
- 0.046 Inches Minimum And 0.050 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
Weapon Systems (WSDC) 5310-01-443-3714
DLA Procurement Analysis 5310-01-443-3714
- Last Stock Position:
- 13 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-443-3714
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 5310-01-443-3714
Freight Information 5310-01-443-3714
5310-01-443-3714 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-443-3714 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-443-3714 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 671 for ocean manifesting and military sealift. 5310-01-443-3714 is not classified as a special type of cargo when transported by water. 5310-01-443-3714 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-443-3714
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5310-01-443-3714 7 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A623FC7SA
- 27 Sep 2023
- Subscribe
- 1965
- Subscribe
- Subscribe
- Subscribe
- SPE4A623PN508
- 16 May 2023
- Subscribe
- 1146
- Subscribe
- Subscribe
- Subscribe
- SPE4A621PV059
- 15 Sep 2021
- Subscribe
- 1223
- Subscribe
- Subscribe
- Subscribe
- SPE5EJ21V3019P00001
- 05 Apr 2021
- Subscribe
- 176
- Subscribe
- Subscribe
- Subscribe
- SPE5E717V5124
- 08 Aug 2017
- Subscribe
- 1582
- Subscribe
- Subscribe
- Subscribe
- SPE5E716M2723
- 28 Apr 2016
- Subscribe
- 1302
- Subscribe
- Subscribe
- Subscribe
- SPE5E714V1452
- 08 Jan 2014
- Subscribe
- 991
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5310-01-443-3714 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: