Premium Information is available for this item - Upgrade for $1 a day
5310-01-434-5894
Flat Washer
5310014345894 014345894 BACW10BN101P
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-434-5894
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-434-5894 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5310-01-434-5894 RQST NE Updated Every Day 5310-01-434-5894 RQST
Updated Every Day 5310-01-434-5894 RQST NE Related Documents 5310-01-434-5894 1+ Documents ( More...
Restrictions 5310-01-434-5894
5310-01-434-5894 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-434-5894
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-434-5894
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
Approved Sources 5310-01-434-5894
- Part Number
- Manufacturer
- Status
- BACW10BN101P
- Manufacturer
- 81205 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- BACW10BN101P
- 10630 - Anillo Industries Llc (Active)
- Secondary Buy
- Secondary Buy
- BACW10BN101P
- 58009 - Moeller Manufacturing & Supply, Llc (Active)
- Secondary Buy
- Secondary Buy
- BACW10BN101P
- 08073 - Mamco Mfg Co Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-01-434-5894
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hardness Rating [CQFM]
- 36.0 Rockwell C Minimum And 40.0 Rockwell C Maximum
- Hole Diameter [AAUB]
- 0.641 Inches Minimum And 0.652 Inches Maximum
- Material Document And Classification [MDCL]
- Mil-S-18728 Mil Spec 1St Material Response Overall Or Mil-S-18729 Mil Spec 2Nd Material Response Overall
- Material [MATT]
- Steel Comp 8630 Overall Or Steel Comp 4130 Overall
- Overall Diameter [ADAV]
- 1.195 Inches Minimum And 1.215 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Specification/Standard Data [ZZZK]
- 81205-Bacw10bn Manufacturers Standard
- Surface Treatment Document And Classification [STDC]
- Ams 2416 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Nickel Overall And Cadmium Overall
- Thickness [ABNM]
- 0.073 Inches Minimum And 0.087 Inches Maximum
DLA Procurement Analysis 5310-01-434-5894
Management Data 5310-01-434-5894
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5310-01-434-5894
Freight Information 5310-01-434-5894
5310-01-434-5894 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-434-5894 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-434-5894 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-434-5894 is not classified as a special type of cargo when transported by water. 5310-01-434-5894 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-434-5894
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-434-5894 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: