Premium Information is available for this item - Upgrade for $1 a day
5310-01-396-8156
Flat Washer
5310013968156 013968156 HP6130 010924
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-396-8156
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-396-8156 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5310-01-396-8156 RQST NE Updated Every Day 5310-01-396-8156 RQST
Updated Every Day 5310-01-396-8156 RQST NE Related Documents 5310-01-396-8156 5+ Documents ( More...
Flat Washer 5310013968156 013968156,HP6130 for $1 a day Upgrade your Account Upgrade 5310-01-396
-8156Flat Washer5310013968156 013968156 HP6130 010924 Hexagon Plain Nut 5310998635473998635473 JavaScript
enable JavaScript in your web browser . 3590-17-004 -9969Barber's Shears3590170049969 170049969PVE-010924
Flat Washer 5310013968156 013968156,HP6130 PVE-010924 (Active) Primary Buy RNCC 3 RNVC 2 DAC 5
(Active) Primary Buy RNCC 3 RNVC 2 DAC 5 A-0560-010924 1PY15 https//www.nsnlookup.com /fsg-53/fsc-5310
/us 5310-01-396-8156 Flat Washer 5310013968156 013968156,HP6130 9969Barber's Shears3590170049969 170049969
https//www.nsnlookup.com /fsg-59/fsc-5930/us 5930-00-455-7801 Toggle Switch 5930004557801004557801 010924
5310-99-863-5473 Hexagon Plain Nut 5310998635473 998635473 004-9969 Part NumberManufacturerStatusPVE-010924
Restrictions 5310-01-396-8156
5310-01-396-8156 is a Flat Washer Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-396-8156
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
Approved Sources 5310-01-396-8156
- Part Number
- Manufacturer
- Status
- 010924
- Manufacturer
- 3AD06 - Dometic Marine Canada Inc. (Active)
- Original Design
- Original Design
- HP6130
- 3AD06 - Dometic Marine Canada Inc. (Active)
- Secondary Buy
- Secondary Buy
DLA Procurement Analysis 5310-01-396-8156
Management Data 5310-01-396-8156
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-01-396-8156
Freight Information 5310-01-396-8156
5310-01-396-8156 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-396-8156 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-396-8156 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-396-8156 is not classified as a special type of cargo when transported by water. 5310-01-396-8156 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-396-8156
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-396-8156 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: