Premium Information is available for this item - Upgrade for $1 a day
5310-01-391-9640
Sleeve Nut
5310013919640 013919640 ASPF-S-V08N7
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
June 2023
4
Marketplace 5310-01-391-9640
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-391-9640 1+ Documents (More...)
United States (US) 4. 5310-01-391-9640 Marketplace Restrictions Approved Sources Datasheet Management
Day 5310-01-391-9640 RQST Updated Every Day 5310-01-391-9640 RQST NE Related Documents 5310-01-391-9640
Restrictions 5310-01-391-9640
5310-01-391-9640 is a Sleeve Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-391-9640
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-391-9640
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- Republic of Korea (ZH01)
- Effective Date:
- 1 Oct 2013
Approved Sources 5310-01-391-9640
- Part Number
- Manufacturer
- Status
- ASPF-S-V08N7
- Manufacturer
- 17446 - Huck International, Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-01-391-9640
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Cross-Sectional Shape [ANLR]
- Round Overall
- Material [MATT]
- Titanium Alloy Uns R56400 Overall
- Nominal Thread Size [CQJX]
- 0.216 Inches
- Nut Diameter [ACTD]
- 0.2630 Inches Minimum And 0.2650 Inches Maximum
- Nut Length [ACVN]
- 0.432 Inches Minimum And 0.442 Inches Maximum
- Lubrication [ABAJ]
- Soluble Lubricant
- Thread Quantity Per Inch [CMLP]
- 48
- Thread Series [BZRR]
- Uns
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3B
DLA Procurement Analysis 5310-01-391-9640
Management Data 5310-01-391-9640
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5310-01-391-9640
Freight Information 5310-01-391-9640
5310-01-391-9640 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 024850. A Sub NMFC of X. It has a NMFC Description of BOAT HATCH COVER. 5310-01-391-9640 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 11640 which rates the freight between FCL and LCL. 5310-01-391-9640 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5310-01-391-9640 is not classified as a special type of cargo when transported by water. 5310-01-391-9640 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5310-01-391-9640 3 Records
Contracting Technical Data File (CTDF) 5310-01-391-9640 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: