Premium Information is available for this item - Upgrade for $1 a day
5310-01-388-8012
Recessed Washer
5310013888012 013888012 NS202860C-7P VN948C-7P MM118C7P AS19879C7P 03A257C-7P
A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes WASHER, CONCAVE, RETAINER, PACKING, and thrust type washers. See also SPACER, SLEEVE; and SPACER, STEPPED. View more Recessed Washer
November 2023
3
Marketplace 5310-01-388-8012
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-388-8012 2+ Documents (More...)
United States (US) 4. 5310-01-388-8012 Marketplace Restrictions Approved Sources Datasheet Management
BUY NE FedMall Updated Every Day 5310-01-388-8012 RQST NE Updated Every Day 5310-01-388-8012 RQST
Recessed Washer 5310013888012 013888012 United States (US) 4. 5310-01-388-8012 Marketplace Restrictions
Approved Sources Datasheet Management BUY NE FedMall Updated Every Day 5310-01-388-8012 RQST NE Updated
Restrictions 5310-01-388-8012
5310-01-388-8012 is a Recessed Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-388-8012
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5310-01-388-8012
- Part Number
- Manufacturer
- Status
- NS202860C-7P
- Manufacturer
- 80539 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- VN948C-7P
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- MM118C7P
- 58009 - Moeller Manufacturing & Supply, Llc (Active)
- Secondary Buy
- Secondary Buy
- AS19879C7P
- 10630 - Anillo Industries Llc (Active)
- Secondary Buy
- Secondary Buy
- 03A257C-7P
- 76823 - Northrop Grumman Systems Corporation (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5310-01-388-8012
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Hole Diameter [AAUB]
- 0.439 Inches Minimum And 0.443 Inches Maximum
- Material Thickness [ABPX]
- 0.071 Inches Minimum And 0.085 Inches Maximum
- Material [MATT]
- Iron Alloy 660 Overall Or Nickel Alloy 718 Overall
- Outside Diameter [ABKV]
- 0.807 Inches Minimum And 0.817 Inches Maximum
- Material Document And Classification [MDCL]
- Ams5525 Assn Std 1St Material Response Overall Or Ams5737 Assn Std 1St Material Response Overall Or Ams5596 Assn Std 2Nd Material Response Overall Or Ams5597 Assn Std 2Nd Material Response Overall
- Recess Angle [CSTM]
- 80.0 Degrees Minimum And 100.0 Degrees Maximum
- Recess Diameter [ABMD]
- 0.539 Inches Minimum And 0.549 Inches Maximum
- Style Designator [STYL]
- Recessed
- Surface Treatment Document And Classification [STDC]
- Qq-P-416, Ty2, Cl 2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall And Chromate Overall
Weapon Systems (WSDC) 5310-01-388-8012
DLA Procurement Analysis 5310-01-388-8012
- Last Stock Position:
- 137 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-388-8012
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5310-01-388-8012
Freight Information 5310-01-388-8012
5310-01-388-8012 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-388-8012 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-388-8012 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-388-8012 is not classified as a special type of cargo when transported by water. 5310-01-388-8012 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5310-01-388-8012 3 Records
Contracting Technical Data File (CTDF) 5310-01-388-8012 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: