Premium Information is available for this item - Upgrade for $1 a day
5310-01-385-7083
Flat Washer
5310013857083 013857083 FF-W-92 MS51412-27
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
7
Marketplace 5310-01-385-7083
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-385-7083 5+ Documents (More...)
(Identification) 1/3 NSN 5310-01-385-7083 (Identification) 2/3 NSN 5310-01-385-7083 (Identification
MS51412-27 WASHER,FLAT 31 EA NS Request Quotation Updated Every Day 5310-01-385-7083 RQST NE Updated
FFW92 WASHER,FLAT 824 EA NS Request Quotation FF-W-92 WASHER,FLAT 7971 EA NS Request Quotation Subscribe
FF-W-92 WASHER,FLAT 34 EA NS Request Quotation Updated Every Day 5310-01-379-5724 RQST Updated Every
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe to View Vendor Details...
/fsg-53/fsc-5310/us 5310-01-345-6557 Flat Washer 5310013456557 013456557,FF-W-92 FF-W-92 WASHER,FLAT
FF-W-92 WASHER,FLAT 34 HD NS Request Quotation Subscribe to View Vendor Details...
/fsg-53/fsc-5310/us 5310-01-301-1983 Flat Washer 5310013011983 013011983,FF-W-92 FF-W-92 WASHER,FLAT
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe to View Vendor Details...
FF-W-92 WASHER,FLAT 34 HD NS Request Quotation Subscribe to View Vendor Details...
Restrictions 5310-01-385-7083
5310-01-385-7083 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-385-7083
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-385-7083
- US Army (A919)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AJCLBDAZ
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKEJVHXHSHD
- Brazil (YA01)
- Effective Date:
- 1 Jul 2001
- United Kingdom (ZK01)
- Effective Date:
- 1 Jun 2001
Approved Sources 5310-01-385-7083
- Part Number
- Manufacturer
- Status
- MS51412-27
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- FF-W-92
- 81348 - Federal Specifications Promulgated (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 5310-01-385-7083
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hardness Rating [CQFM]
- 34.0 Rockwell C Minimum And 38.0 Rockwell C Maximum
- Hole Diameter [AAUB]
- 0.396 Inches Minimum And 0.406 Inches Maximum
- Material [MATT]
- Steel Comp 1008 Overall Or Steel Comp 1010 Overall
- Material Document And Classification [MDCL]
- Astm A108 Assn Std Single Material Response Overall
- Overall Diameter [ADAV]
- 1.240 Inches Minimum And 1.260 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Surface Treatment Document And Classification [STDC]
- Astm B633, Ty 2 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Zinc Overall And Chromate Overall
- Thickness [ABNM]
- 0.075 Inches Minimum And 0.202 Inches Maximum
Weapon Systems (WSDC) 5310-01-385-7083
DLA Procurement Analysis 5310-01-385-7083
- Last Stock Position:
- 3680 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-385-7083
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5310-01-385-7083
Freight Information 5310-01-385-7083
5310-01-385-7083 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-385-7083 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-385-7083 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5310-01-385-7083 is not classified as a special type of cargo when transported by water. 5310-01-385-7083 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-385-7083
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-01-385-7083 1 Records
Contracting Technical Data File (CTDF) 5310-01-385-7083 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: