Premium Information is available for this item - Upgrade for $1 a day
5310-01-380-2518
Flat Washer
5310013802518 013802518 35430 40517
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
3
Marketplace 5310-01-380-2518
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-380-2518 5+ Documents (More...)
15 Minutes 5310-01-380-2518 BUY NE FedMall Updated Every Day 5310-01-380-2518 RQST NE Updated Every
Day 5310-01-380-2518 RQST Updated Every Day 5310-01-380-2518 RQST NE Related Documents 5310-01-380-2518
Flat Washer 5310013802518 013802518,35430 -354-1227 Part NumberManufacturerStatusC3-35430 https
how to enable JavaScript in your web browser . 2920-99-495-4529Bellows2920994954529 994954529B-35430
enable JavaScript in your web browser . 3040-22-125-1392Brake Band3040221251392 221251392EC-433123-35430
Flat Washer 5310013802518 013802518,35430 99-495-4529Bellows2920994954529 994954529B-35430 https
enable JavaScript in your web browser . 3695-22-618-3061Chain Saw3695226183061 226183061EC-433122-35430
enable JavaScript in your web browser . 3695-22-618-3061Chain Saw3695226183061 226183061EC-433122-35430
enable JavaScript in your web browser . 3695-22-618-3066Chain Saw3695226183066 226183066EC-433142-35430
Flat Washer 5310013802518 013802518,35430 1392Brake Band3040221251392 221251392EC-433123-35430
Restrictions 5310-01-380-2518
5310-01-380-2518 is a Flat Washer Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-380-2518
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
Approved Sources 5310-01-380-2518
- Part Number
- Manufacturer
- Status
- 35430
- Manufacturer
- 09004 - Transistor Devices Inc (Active)
- Primary Buy
- Primary Buy
- 40517
- 09004 - Transistor Devices Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
DLA Procurement Analysis 5310-01-380-2518
Management Data 5310-01-380-2518
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5310-01-380-2518
Freight Information 5310-01-380-2518
5310-01-380-2518 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-380-2518 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-380-2518 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-380-2518 is not classified as a special type of cargo when transported by water. 5310-01-380-2518 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-380-2518 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: