Premium Information is available for this item - Upgrade for $1 a day
5310-01-376-5302
Flat Washer
5310013765302 013765302 12417975-008 ISO7093-A8.4-ST-A3D DIN9021-A8.4-ST-A3D 12417875 12417975
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
13
Marketplace 5310-01-376-5302
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-376-5302 5+ Documents (More...)
-008 WASHER,FLAT 108 EA NS Request Quotation Subscribe to View Vendor Details... 12417975-008 WASHER
-008 WASHER,FLAT 108 EA NS Request Quotation Subscribe to View Vendor Details... 12417975-008 WASHER
12417875-001 A rigid item usually fabricated from flat material, forming two alternate or two adjacent
Flat Washer 5310013765302 013765302 -376-5302Flat Washer5310013765302 013765302 12417975-008 ISO7093
https //www.nsnlookup.com /fsg-53/fsc-5310/us 12417975 https//www.nsnlookup.com /fsg-53/fsc-5310/us
https//www.nsnlookup.com /fsg-53/fsc-5310/us 12417975 -006 WASHER 13 EA NS Request Quotation 12417975
https//www.nsnlookup.com /fsg-53/fsc-5310/us 12417975 -006 WASHER 13 EA NS Request Quotation 12417975
https//www.nsnlookup.com /fsg-53/fsc-5310/us 12417975 www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-
https//www.nsnlookup.com /fsg-53/fsc-5310/us 12417975 12417975 -006 WASHER 13 EA NS Request Quotation
https//www.nsnlookup.com /fsg-53/fsc-5310/us 12417975 -006 WASHER 13 EA NS Request Quotation 12417975
Restrictions 5310-01-376-5302
5310-01-376-5302 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-376-5302
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-376-5302
- US Army (A919)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Jun 2005
Approved Sources 5310-01-376-5302
- Part Number
- Manufacturer
- Status
- 12417975-008
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
- 12417975-008
- 0FW39 - Bae Systems Tactical Vehicle Systems (Active)
- Secondary Buy
- Secondary Buy
- 12417975-008
- 076M6 - Bae Systems Land & Armaments L.P. (Active)
- Secondary Buy
- Secondary Buy
- ISO7093-A8.4-ST-A3D
- I9008 - International Organization For (Active)
- Secondary Buy
- Secondary Buy
- DIN9021-A8.4-ST-A3D
- D8286 - Din Deutsches Institut Fur Normung (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 12417875
- 19207 - U S Army Tank Automotive Command (Active)
- Informational Drawing
- Informational Drawing
- 12417975
- 19207 - U S Army Tank Automotive Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5310-01-376-5302
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 8.4 Millimeters Minimum And 8.6 Millimeters Maximum
- End Item Identification [AGAV]
- Medium Mine Protected Vehicle - Mmpv
- Material [MATT]
- Steel Overall
- Overall Diameter [ADAV]
- 23.48 Millimeters Minimum And 24.00 Millimeters Maximum
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 1.8 Millimeters Minimum And 2.2 Millimeters Maximum
Weapon Systems (WSDC) 5310-01-376-5302
DLA Procurement Analysis 5310-01-376-5302
- Last Stock Position:
- 242311 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-376-5302
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5310-01-376-5302
Freight Information 5310-01-376-5302
5310-01-376-5302 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-376-5302 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-376-5302 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-01-376-5302 is not classified as a special type of cargo when transported by water. 5310-01-376-5302 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-376-5302
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-01-376-5302 2 Records
Contracting Technical Data File (CTDF) 5310-01-376-5302 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: