Premium Information is available for this item - Upgrade for $1 a day
5310-01-368-8668
Sleeve Nut
5310013688668 013688668 207124
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
November 2023
6
Marketplace 5310-01-368-8668
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-368-8668 5+ Documents (More...)
BOLT,SHOULDER 1 EA NS Request Quotation Subscribe to View Vendor Details... 207124 BOLT,SHOULDER 1 EA
COVER GEAR SHIFT CO 1 EA NS Request Quotation Subscribe to View Vendor Details... 207124 COVER GEAR
BATTERY,STORAGE 1 EA NS Request Quotation Subscribe to View Vendor Details... 207124 BATTERY,STORAGE
1 EA NS Request Quotation Subscribe to View Vendor Details... 207124 BATTERY,STORAGE 1 EA NS Request
BOLT,SHOULDER 1 EA NS Request Quotation Subscribe to View Vendor Details... 207124 BOLT,SHOULDER 1 EA
VS2845-4 BOLT,SHOULDER 10 EA NS Request Quotation Subscribe to View Vendor Details... 207124 BOLT,SHOULDER
Restrictions 5310-01-368-8668
5310-01-368-8668 is a Sleeve Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-368-8668
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-368-8668
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5310-01-368-8668
- Part Number
- Manufacturer
- Status
- 207124
- Manufacturer
- 19565 - Symbolic Displays, Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-01-368-8668
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Cross-Sectional Shape [ANLR]
- Round Overall
- Flange Diameter [ABKK]
- 0.235 Inches Minimum And 0.245 Inches Maximum
- Flange Thickness [ABKU]
- 0.025 Inches Minimum And 0.035 Inches Maximum
- Material [MATT]
- Aluminum Alloy 6061 Overall
- Nominal Thread Size [CQJX]
- 0.112 Inches
- Nut Diameter [ACTD]
- 0.175 Inches Minimum And 0.185 Inches Maximum
- Nut Length [ACVN]
- 0.390 Inches Minimum And 0.400 Inches Maximum
- Nut Style [ACTA]
- Sleeve
- Special Features [FEAT]
- Edges Of Flange To Be Slightly Beveled; A Groove With A 0.031 Radius Exists Along The End Of The Nut Length
- Thread Quantity Per Inch [CMLP]
- 40
- Thread Series [BZRR]
- Unc
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625,Ty2,Cl2 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Anodize Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3B
Weapon Systems (WSDC) 5310-01-368-8668
DLA Procurement Analysis 5310-01-368-8668
- Last Stock Position:
- 1 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-368-8668
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5310-01-368-8668
Freight Information 5310-01-368-8668
5310-01-368-8668 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 024850. A Sub NMFC of X. It has a NMFC Description of BOAT HATCH COVER. 5310-01-368-8668 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 11640 which rates the freight between FCL and LCL. 5310-01-368-8668 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5310-01-368-8668 is not classified as a special type of cargo when transported by water. 5310-01-368-8668 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5310-01-368-8668 2 Records
Contracting Technical Data File (CTDF) 5310-01-368-8668 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: