Premium Information is available for this item - Upgrade for $1 a day
5310-01-346-2410
Knurled Plain Nut
5310013462410 013462410 FF-N-836 MS16994-67C
A nut, round in shape, having all or part of its outer surface knurled. It may have provisions for external wrenching. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, ROUND. (When height or thickness, and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). View more Knurled Plain Nut
June 2023
7
Marketplace 5310-01-346-2410
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5310-01-346-2410 5+ Documents (More...)
FF-N-836 NUT,PLAIN,KNURLED 35 EA NS Request Quotation FFN836.
BUY NE FedMall Updated Every Day 5310-01-346-2410 RQST NE Updated Every Day 5310-01-346-2410 RQST Updated
FF-N-836 TY2ST13GRAGPC 121743 A48ZC A nut, flat on top and bottom having 6 flat sides.
,PLAIN,HEXAGON 126 HD NS Request Quotation FF-N836 NUT,PLAIN,HEXAGON 226 HD NS Request Quotation FF-N-836
FF-N-836 TY1ST1 124589 15491X A nut, flat on top and bottom, having 4 flat sides.
FF-N-836 NUT,PLAIN,SQUARE 35 EA NS Request Quotation FFN836.
FF-N-836 TY2ST13CL2B A nut, flat on top and bottom having 6 flat sides.
FF-N-836 TY2ST13CL2B PD77 1143F8 N16311L 114378 84850 DX418K A nut, flat on top and bottom having FF-N
FF-N-836 TY1ST3SZ10 4B2047 110634 01014901 MIL-B-933 A nut, flat on top and bottom, having 4 flat
FF-N-836 NUT,PLAIN,SQUARE 11 HD NS Request Quotation Subscribe to View Vendor Details...
Restrictions 5310-01-346-2410
5310-01-346-2410 is a Knurled Plain Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-346-2410
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-346-2410
- US Army (A919)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- BF
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
Approved Sources 5310-01-346-2410
- Part Number
- Manufacturer
- Status
- MS16994-67C
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- FF-N-836
- 81348 - Federal Specifications Promulgated (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 5310-01-346-2410
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Material [MATT]
- Steel Comp 301 Overall Or Steel Comp 302 Overall Or Steel Comp 302B Overall Or Steel Comp 303 Overall Or Steel Comp 303Se Overall Or Steel Comp 304 Overall Or Steel Comp 304L Overall Or Steel Comp 305 Overall Or Steel Comp 308 Overall Or Steel Comp 309 Overall Or Steel Comp 309S Overall Or Steel Comp 310 Overall Or Steel Comp 310S Overall Or Steel Comp 314 Overall Or Steel Comp 316 Overall Or Steel Comp 316L Overall Or Steel Comp 317 Overall Or Steel Comp 321 Overall Or Steel Comp 347 Overall Or Steel Comp 348 Overall Or Steel Comp 384 Overall Or Steel Comp 385 Overall
- Nominal Thread Size [CQJX]
- 0.312 Inches
- Nondefinitive Spec/Std Data [ZZZT]
- 7 Type
- Nut Diameter [ACTD]
- 1.240 Inches Minimum And 1.260 Inches Maximum
- Nut Style [ACTA]
- Knurled
- Nut Thickness [ADBG]
- 0.370 Inches Minimum And 0.390 Inches Maximum
- Material Document And Classification [MDCL]
- 66 Fed Std All Material Responses Overall
- Thread Series [BZRR]
- Unc
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 2B
- Thread Quantity Per Inch [CMLP]
- 18
DLA Procurement Analysis 5310-01-346-2410
Management Data 5310-01-346-2410
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5310-01-346-2410
Freight Information 5310-01-346-2410
5310-01-346-2410 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-346-2410 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-346-2410 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5310-01-346-2410 is not classified as a special type of cargo when transported by water. 5310-01-346-2410 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-346-2410
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-346-2410 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: