Premium Information is available for this item - Upgrade for $1 a day
5310-01-338-7340
Concave Washer
5310013387340 013387340 BACW10CA5CCU
A washer which is round with a centrally located hole. One bearing surface is smooth, flat, and unbroken, the other bearing surface is smooth, unbroken, and is recessed to form a curved or spherical contour. See also WASHER (1), CONVEX. Excludes WASHER (1), RECESSED and BEARING, WASHER, THRUST. View more Concave Washer
November 2023
3
Marketplace 5310-01-338-7340
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-338-7340 1+ Documents (More...)
/fsg-53/fsc-5310/us
BUY NE FedMall Updated Every Day 5310-01-338-7340 RQST NE Updated Every Day 5310-01-338-7340 RQST
Updated Every Day 5310-01-338-7340 RQST NE Related Documents 5310-01-338-7340 1+ Documents ( More...
Restrictions 5310-01-338-7340
5310-01-338-7340 is a Concave Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-338-7340
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-338-7340
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GGGT
Approved Sources 5310-01-338-7340
- Part Number
- Manufacturer
- Status
- BACW10CA5CCU
- Manufacturer
- 81205 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-01-338-7340
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Hardness Rating [CQFM]
- 40.0 Rockwell C Minimum And 43.0 Rockwell C Maximum
- Hole Diameter [AAUB]
- 0.420 Inches Minimum And 0.430 Inches Maximum
- Material Thickness [ABPX]
- 0.120 Inches Minimum And 0.140 Inches Maximum
- Material [MATT]
- Steel Comp 630 Overall Or Steel Comp 631 Overall
- Outside Diameter [ABKV]
- 0.645 Inches Minimum And 0.655 Inches Maximum
- Material Document And Classification [MDCL]
- Ams 5643 Assn Std 1St Material Response Overall Or Ams 5528 Assn Std 2Nd Material Response Overall
- Radius [ABGG]
- 0.360 Inches Minimum And 0.390 Inches Maximum
- Specification/Standard Data [ZZZK]
- 81205-Baxw10ca Manufacturers Standard
- Style Designator [STYL]
- Concave
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
Weapon Systems (WSDC) 5310-01-338-7340
DLA Procurement Analysis 5310-01-338-7340
- Last Stock Position:
- 120 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-338-7340
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EK
- B-1
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-338-7340
Freight Information 5310-01-338-7340
5310-01-338-7340 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-338-7340 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-338-7340 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-338-7340 is not classified as a special type of cargo when transported by water. 5310-01-338-7340 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5310-01-338-7340 1 Records
Contracting Technical Data File (CTDF) 5310-01-338-7340 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: