Premium Information is available for this item - Upgrade for $1 a day
5310-01-334-0878
Flat Washer
5310013340878 013340878 211041883 801-6405342 FIND 9 801-6405342 FIND 9CP 211041883CP
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
14
Marketplace 5310-01-334-0878
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-334-0878 4+ Documents (More...)
RQST NE Updated Every Day 5310-01-334-0878 RQST Updated Every Day 5310-01-334-0878 RQST NE Related Documents
5310-01-334-0878 4+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-334-0878
Flat Washer 5310013340878 013340878,211041883 DF330707-09 DF330707-09 G547-0002-DF330707-09 801
-6405342 FIND 9CP 801-6405342 FIND 9 DF330707 FIND 9 211090388 Upgrade your Account Upgrade 5310-01-334
18838405211041883211041883 Restrictions 5120-21-109-0388 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-334-0878
Flat Washer 5310013340878 013340878,211041883 Upgrade for $1 a day Upgrade your Account Upgrade
801-6405342 FIND 9 DF330707 FIND 9 211090388 7550478-DF330707-09CP DF330707-09CP 211090388CP
Flat Washer 5310013340878 013340878,211041883 Washer Blank 5310016339349016339349 9349Washer Blank5310016339349
Restrictions 5310-01-334-0878
5310-01-334-0878 is a Flat Washer that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-334-0878
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2014
- Supplementary Collaborators:
- HX
- United States of America (ZZ)
Approved Sources 5310-01-334-0878
- Part Number
- Manufacturer
- Status
- 211041883
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Incomplete Reference
- Incomplete Reference
- 801-6405342 FIND 9
- 53711 - Naval Sea Systems Command (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 801-6405342 FIND 9CP
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- 211041883CP
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5310-01-334-0878
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Hole Diameter [AAUB]
- 0.530 Inches Nominal
- End Item Identification [AGAV]
- Ball Valve .25Ips
- Part Name Assigned By Controlling Agency [CXCY]
- Navy Special Project
- Reference Number Differentiating Characteristics [ZZZY]
- Cleaning, Packaging, And Marking Iaw Mil-Std-1330D
- Overall Diameter [ADAV]
- 1.125 Inches Minimum And 1.126 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Surface Finish [CSYM]
- 63.0 Microinches All Surfaces
- Thickness [ABNM]
- 0.044 Inches Minimum And 0.048 Inches Maximum
DLA Procurement Analysis 5310-01-334-0878
Management Data 5310-01-334-0878
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- CP
- An item that requires special cleaning and packaging for oxygen/nitrogen service (eg, valves, piping systems, generators).
Similar Supply Items to 5310-01-334-0878
Freight Information 5310-01-334-0878
5310-01-334-0878 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-334-0878 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-334-0878 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-334-0878 is not classified as a special type of cargo when transported by water. 5310-01-334-0878 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-334-0878 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: