Premium Information is available for this item - Upgrade for $1 a day
5310-01-330-8518
Preload Indicating Washer
5310013308518 013308518 PLI22-6-12.4 03A279-6-124
An item round in shape having a centrally located hole. It consists of two concentric (inner and outer) steel rings, the inner ring is smaller in diameter and higher than the other. These rings are sandwiched between two close tolerance plain washers. As the assembly is tightened, the inner ring takes the load and is deformed until the loose outer ring is bound between the upper and lower plain washers and cannot be moved. The tightened load in the bolt is equal to the load required to compress the inner ring. When the binding of the outer ring occurs and can not be moved, it is a sign that the desired load has been reached. View more Preload Indicating Washer
May 2023
7
Marketplace 5310-01-330-8518
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-330-8518 5+ Documents (More...)
Indicating Washer 5310015574222 846-9684 5310-14-451-7602 5310-14-524-3863 5310-21-846-9686 5310-01-330-8518
Indicating Washer 5310144517602 846-9684 5310-14-451-7602 5310-14-524-3863 5310-21-846-9686 5310-01-330-8518
Restrictions 5310-01-330-8518
5310-01-330-8518 is a Preload Indicating Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-330-8518
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5310-01-330-8518
- Part Number
- Manufacturer
- Status
- PLI22-6-12.4
- Manufacturer
- 80539 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- 03A279-6-124
- 76823 - Northrop Grumman Systems Corporation (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5310-01-330-8518
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Bolt Minimum Tensil Strength [CZGL]
- 11160 Pounds Per Square Inch
- Outside Diameter [ABKV]
- 0.740 Inches Minimum And 0.760 Inches Maximum
- Recess Angle [CSTM]
- 120.0 Degrees Nominal
- Unloaded Length [CZGP]
- 0.296 Inches Maximum
DLA Procurement Analysis 5310-01-330-8518
Management Data 5310-01-330-8518
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5310-01-330-8518
Freight Information 5310-01-330-8518
5310-01-330-8518 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-330-8518 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-330-8518 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-330-8518 is not classified as a special type of cargo when transported by water. 5310-01-330-8518 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-330-8518
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-330-8518 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: