Premium Information is available for this item - Upgrade for $1 a day
5310-01-309-7350
Sleeve Nut
5310013097350 013097350 4674892 ITEM 11 ASTMB150ALLOYC63200TEMPTQ50 4674892 ITEM 11L1 ASTMB150ALLOYC63200TEMPTQ50L1
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
May 2023
3
Marketplace 5310-01-309-7350
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-309-7350 1+ Documents (More...)
RQST NE Updated Every Day 5310-01-309-7350 RQST Updated Every Day 5310-01-309-7350 RQST NE Related Documents
5310-01-309-7350 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-309-7350
Restrictions 5310-01-309-7350
IUID Required
5310-01-309-7350 is a Sleeve Nut that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-309-7350
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-309-7350
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Collaborators:
- JB
- Supplementary Receivers:
- GG
Approved Sources 5310-01-309-7350
- Part Number
- Manufacturer
- Status
- 4674892 ITEM 11
- Manufacturer
- 80064 - Naval Ship Systems Command (Active)
- Incomplete Reference
- Incomplete Reference
- ASTMB150ALLOYC63200TEMPTQ50
- 80064 - Naval Ship Systems Command (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 4674892 ITEM 11L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- ASTMB150ALLOYC63200TEMPTQ50L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5310-01-309-7350
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Criticality Code Justification [CRTL]
- Zzzy
- Material Document And Classification [MDCL]
- Mil-B-24059 Mil Spec Single Material Response Overall
- Material [MATT]
- Copper Alloy Overall
- Nominal Thread Size [CQJX]
- 2.500 Inches
- Reference Number Differentiating Characteristics [ZZZY]
- Quality Control Iaw Navships 0948-045-7010 Material Identification And Control Instruction For Level 1 Items
- Special Features [FEAT]
- Overall Length-6In;Overall Dia-5.25In
- Thread Quantity Per Inch [CMLP]
- 8
- Thread Series [BZRR]
- Unc
- Supplementary Features [SUPP]
- End Item-Periscope Hoist Cylinger
- Thread Class [AAJD]
- 2B
Management Data 5310-01-309-7350
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 5310-01-309-7350
Freight Information 5310-01-309-7350
5310-01-309-7350 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-309-7350 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5310-01-309-7350 is rated as a variable freight class when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-309-7350 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-309-7350 is not classified as a special type of cargo when transported by water. 5310-01-309-7350 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-309-7350
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 8.0" H x 8.0" W x 8.0" L
- --
- --
- Physical Protection
- Any Suitable Process
- 8.0" H x 8.0" W x 8.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-P-130, Laminated and Creped Wrapping Paper
- ASTM-D4727, Fiberboard used as Pads, Cells, Die-cuts or Sleeves
- 1 inch thick
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
- Open for inspection or use only
- MIL-P-130, Laminated and Creped Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement