Premium Information is available for this item - Upgrade for $1 a day
5310-01-296-7747
Flat Washer
5310012967747 012967747 76885-A
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
3
Marketplace 5310-01-296-7747
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-296-7747 5+ Documents (More...)
Flat Washer 76885-ARNCC: 3 | RNVC: 2 | DAC: 5 23 Mar 1989 2805-00-128-9785 https//www.nsnlookup.com
Replacement Manufacturer with the Cage Code 76885.
What is CAGE Code 76885?
What is CAGE Code 76885?
Replacement Manufacturer with the Cage Code 76885.
Replacement Manufacturer with the Cage Code 76885.
What is CAGE Code 76885?
) Lima 6. 76885 Teledyne Ohio Steel, Teledyne Industries Inc, Sub Of Teledyne Inc is a Cancelled Without
Replacement Manufacturer with the Cage Code 76885.
Restrictions 5310-01-296-7747
5310-01-296-7747 is a Flat Washer Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Approved Sources 5310-01-296-7747
- Part Number
- Manufacturer
- Status
- 76885-A
- Manufacturer
- 29201 - John Deer Consumer Products Inc (Active)
- Primary Buy
- Primary Buy
DLA Procurement Analysis 5310-01-296-7747
Management Data 5310-01-296-7747
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- May 2011
- Department of the Navy (DN)
- EA
- Subscribe
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Navy (DN)
- N
- V
- Discontinued Without Replacement
- V
- Defense Logistics Agency (DS)
- I
- V
- Discontinued Without Replacement
- V
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-296-7747
Contracting Technical Data File (CTDF) 5310-01-296-7747 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: