Premium Information is available for this item - Upgrade for $1 a day
5310-01-291-7238
Flat Washer
5310012917238 012917238 130057
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
1
Marketplace 5310-01-291-7238
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5310-01-291-7238 5+ Documents (More...)
/fsg-53/fsc-5310/us 5310-01-291-7238 Flat Washer 5310012917238 012917238,130057 Request a Quotation
from participating marketplace vendors Request Global Test Supply 130057 SCS 130057 Updated Every Day
vendors Request Global Test Supply 130057 SCS 130057 https//www.nsnlookup.com /fsg-61/fsc-6135/us 6135
SCS 130057 Request a Quotation from participating marketplace vendors Request Global Test Supply 130057
SCS 130057 Related https//www.nsnlookup.com /fsg-61/fsc-6135/us 6135-01-132-6310 Cell 6135011326310
SCS 130057 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-291-7238 Flat Washer 5310012917238 012917238,130057
SCS 130057 130057 Request a Quotation from participating marketplace vendors Request Global Test Supply
SCS 130057 vendors Request Global Test Supply 130057 SCS 130057 https//www.nsnlookup.com /fsg-61/fsc
-0001 SD-130057-001 An electrical fitting with electrical contacts, constructed to be affixed to the
Flat Washer 5310012917238 012917238,130057 Electrical Plug Connector 5935016734314 day Upgrade
Restrictions 5310-01-291-7238
5310-01-291-7238 is a Flat Washer Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-291-7238
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2014
- Supplementary Collaborators:
- HX
- United States of America (ZZ)
Approved Sources 5310-01-291-7238
- Part Number
- Manufacturer
- Status
- 130057
- Manufacturer
- 0D0U8 - B And B Fasteners Inc (Active)
- Primary Buy
- Primary Buy
DLA Procurement Analysis 5310-01-291-7238
Management Data 5310-01-291-7238
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-01-291-7238
Freight Information 5310-01-291-7238
5310-01-291-7238 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-291-7238 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-291-7238 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-291-7238 is not classified as a special type of cargo when transported by water. 5310-01-291-7238 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-291-7238 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: