Premium Information is available for this item - Upgrade for $1 a day
5310-01-276-1658
Flat Washer
5310012761658 012761658 KHG122J TW-516-10-045-T LL-HX5-6489
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
5
Marketplace 5310-01-276-1658
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-276-1658 4+ Documents (More...)
(Identification) 1/3 NSN 5310-01-276-1658 (Identification) 2/3 NSN 5310-01-276-1658 (Identification
BUY NE FedMall Updated Every Day 5310-01-276-1658 RQST NE Updated Every Day 5310-01-276-1658 RQST
KHG122J WASHER BLANK 35 EA NS Request Quotation Updated Every Day 5310-01-274-5675 RQST NE Updated Every
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-274-5675 Washer Blank 5310012745675012745675 KHG122J
Flat Washer 5310012761658 012761658,KHG122J $1 a day Upgrade your Account Upgrade 5310-01-276-1658Flat
Washer5310012761658 012761658 KHG122J TW-516-10 KHG122J a day Upgrade your Account Upgrade 5310-01-276
Flat Washer 5310012761658 012761658,KHG122J a day Upgrade your Account Upgrade 5310-01-276-1658Flat
Washer5310012761658 012761658 KHG122J TW-516-10-045 NumberManufacturerStatusKHG122J 02750 - Eaton Aerospace
Restrictions 5310-01-276-1658
5310-01-276-1658 is a Flat Washer that does not have a nuclear hardened feature, but does have another critical feature or features such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-276-1658
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-276-1658
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2014
- United States of America (ZZ)
Approved Sources 5310-01-276-1658
- Part Number
- Manufacturer
- Status
- KHG122J
- Manufacturer
- 02750 - Eaton Aerospace Llc (Active)
- Reparable Source Control
- Reparable Source Control
- TW-516-10-045-T
- 08289 - The Delbert Blinn Co Inc (Active)
- Primary Reparable
- Primary Reparable
- LL-HX5-6489
- 14153 - Defense Logistics Agency (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-01-276-1658
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Criticality Code Justification [CRTL]
- Zzzy
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Departure From Cited Document [ZZZW]
- As Modified By Material
- Hole Diameter [AAUB]
- 0.210 Inches Maximum And 0.190 Inches Minimum
- Material [MATT]
- Plastic Polytetrafluoroethylene Overall
- Part Name Assigned By Controlling Agency [CXCY]
- Washer,Flat
- Reference Number Differentiating Characteristics [ZZZY]
- As Differentiated By Material Which Must Conform To Ships Parts Control Center Special Quality Control Provisions.
- Overall Diameter [ADAV]
- 0.290 Inches Maximum And 0.270 Inches Minimum
- Peripheral Shape Style [ABMW]
- Round
- Special Test Features [SPCL]
- Special Quality Control Testing
- Test Data Document [TEST]
- 81349-Mil-P-23199 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thickness [ABNM]
- 0.055 Inches Maximum And 0.035 Inches Minimum
DLA Procurement Analysis 5310-01-276-1658
Management Data 5310-01-276-1658
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-01-276-1658
Freight Information 5310-01-276-1658
5310-01-276-1658 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-276-1658 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-276-1658 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-276-1658 is not classified as a special type of cargo when transported by water. 5310-01-276-1658 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-276-1658 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: