Premium Information is available for this item - Upgrade for $1 a day
5310-01-267-6208
Flat Washer
5310012676208 012676208 700022-0022 B6-08
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
6
Marketplace 5310-01-267-6208
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-267-6208 2+ Documents (More...)
(Identification) 1/3 NSN 5310-01-267-6208 (Identification) 2/3 NSN 5310-01-267-6208 (Identification
BUY NE FedMall Updated Every Day 5310-01-267-6208 RQST NE Updated Every Day 5310-01-267-6208 RQST
Updated Every Day 6645-00-824-6407 RQST Updated https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-267-6208
Flat Washer 5310012676208 012676208 RQST NE Updated Every Day 5310-01-267-6208 RQST https//www.nsnlookup.com
Restrictions 5310-01-267-6208
5310-01-267-6208 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-267-6208
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-267-6208
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
Approved Sources 5310-01-267-6208
- Part Number
- Manufacturer
- Status
- 700022-0022
- Manufacturer
- 19059 - Datametrics Corporation (Active)
- Original Design
- Original Design
- 700022-0022
- 00141 - Roller Bearing Co Of America, Inc (Active)
- Secondary Buy
- Secondary Buy
- B6-08
- 00141 - Roller Bearing Co Of America, Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 700022-0022
- 09BZ2 - Rugged Information Technology (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5310-01-267-6208
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.187 Inches Minimum And 0.190 Inches Maximum
- Material [MATT]
- Steel Comp 303 Overall Or Steel Comp 303Se Overall
- Material Document And Classification [MDCL]
- Astm A582 Assn Std All Material Responses Overall
- Overall Diameter [ADAV]
- 0.245 Inches Minimum And 0.255 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Surface Treatment Document And Classification [STDC]
- Qq-P-35,Ty 2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thickness [ABNM]
- 0.029 Inches Minimum And 0.033 Inches Maximum
DLA Procurement Analysis 5310-01-267-6208
Management Data 5310-01-267-6208
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-01-267-6208
Freight Information 5310-01-267-6208
5310-01-267-6208 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-267-6208 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-267-6208 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5310-01-267-6208 is not classified as a special type of cargo when transported by water. 5310-01-267-6208 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-267-6208
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5310-01-267-6208 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: